Abstract
Computational prediction of protein structure has been pursued intensely for decades, motivated largely by the goal of using structural models for drug discovery. Recently developed machine learning methods such as AlphaFold 2 (AF2) have dramatically improved protein structure prediction, with reported accuracy approaching that of experimentally determined structures. To what extent do these advances translate to an ability to predict more accurately how drugs and drug candidates bind to their target proteins? Here we carefully examine the utility of AF2 protein structure models for predicting binding poses of drug-like molecules at the largest class of drug targets, the G protein–coupled receptors. We find that AF2 models capture binding pocket structures much more accurately than traditional homology models, with errors nearly as small as differences between structures of the same protein determined experimentally with different ligands bound. Strikingly, however, the accuracy of ligand binding poses predicted by computational docking to AF2 models is not significantly higher than when docking to traditional homology models and is much lower than when docking to structures determined experimentally without these ligands bound. These results have important implications for all those who might use predicted protein structures for drug discovery.
eLife assessment
This important study presents findings with broad implications for the use of AlphaFold2 models in ligand binding pose modeling, a common task in protein structure modeling. The computational experiments and analyses provide compelling results for the GPCR protein family data, but the conclusions are likely to apply also to other proteins and they will therefore be of interest to biophysicists, physical chemists, structural biologists, and anyone interested or involved in structure-based ligand discovery.
Significance of findings
important: Findings that have theoretical or practical implications beyond a single subfield
- landmark
- fundamental
- important
- valuable
- useful
Strength of evidence
compelling: Evidence that features methods, data and analyses more rigorous than the current state-of-the-art
- exceptional
- compelling
- convincing
- solid
- incomplete
- inadequate
During the peer-review process the editor and reviewers write an eLife assessment that summarises the significance of the findings reported in the article (on a scale ranging from landmark to useful) and the strength of the evidence (on a scale ranging from exceptional to inadequate). Learn more about eLife assessments
Introduction
Recent breakthroughs in machine learning have substantially improved the accuracy of protein structure prediction, to the point that some have declared the problem solved (Baek et al., 2021; Jumper et al., 2021; Ourmazd et al., 2022). Indeed, in the most recent round of the Community Assessment of Structure Prediction (CASP)—a blind protein structure prediction competition— AlphaFold 2 (AF2) demonstrated an unprecedented ability to predict protein structures with atomic accuracy, sometimes rivaling the accuracy of certain experimental methods for structure determination (Kryshtafovych et al., 2021; Tejero et al., 2022)
These advances have generated tremendous excitement, focused in particular on their potential impact on drug discovery (Lowe, 2022; Thornton et al., 2021; Toews, 2021). The vast majority of drug targets are proteins, and structures play a critical role in rational drug design (Anderson, 2003; Kolb et al., 2009). In particular, rational drug design strategies frequently require determining structures of the target protein bound to many ligands, as information on how these ligands bind is critical both to discovering early-stage drug candidates and to optimizing their properties (Maveyraud & Mourey, 2020; Warren et al., 2012). Determining these structures experimentally is typically slow and expensive, and sometimes proves impossible (Slabinski et al., 2007). Tremendous effort has thus gone into development of computational docking methods for predicting ligand binding modes, which have dramatically accelerated this process in cases where a high-resolution experimentally determined structure of the target protein is available (Ferreira et al., 2015; Pinzi & Rastelli, 2019).
However, the metrics generally used to evaluate protein structure prediction methods—including all of those used in CASP—focus on the overall accuracy of predicted structures, rather than on their utility in predicting ligand binding. This has left the large community of academic and industrial researchers who wish to use protein structures to design drugs and other ligands unsure of whether, when, and how to use the new structural models. Improvements in protein structure prediction are widely assumed to lead to better models of ligand binding pockets and thus more accurate predictions of ligand binding (Beuming & Sherman, 2012; Bordogna et al., 2011; Erickson et al., 2004), but to what extent do these assumptions hold?
Here, we address these questions by evaluating (1) the structural accuracy of ligand binding pockets in modeled proteins and (2) the accuracy of ligand binding poses predicted using these models, where a ligand’s binding pose is specified by the 3D coordinates of its atoms when bound to the target protein. We evaluate models generated both by AF2 and by a traditional template-based modeling strategy, systematically comparing both to experimentally determined structures.
Several recent studies have experimented with the use of models generated by AF2—and related protein structure prediction approaches such as RoseTTAFold (Baek et al., 2021)—for tasks related to drug design, with mixed results (Díaz-Rovira et al., 2023; He et al., 2022; Heo & Feig, 2022; C. Lee et al., 2022; S. Lee et al., 2022; Liang et al., 2022; Qiao et al., 2022; Scardino et al., 2022; Wong et al., 2022). Our study stands apart in two regards. First, we use structural models generated without any use of known structures of the target protein. For machine learning methods, this requires ensuring that no structure of the target protein was used to train the method. Second, we perform a systematic comparison that takes into account the variation between experimentally determined structures of the same protein when bound to different ligands.
Our results reveal both strengths and weaknesses of AF2 models. The structural accuracy of ligand binding pockets in AF2 models is usually substantially higher than that of traditional homology models. Indeed, the typical difference between corresponding binding pockets in an AF2 model and in an experimentally determined structure is only slightly larger than the typical difference between two experimentally determined structures of the same protein with different ligands bound. Surprisingly, however, ligand binding poses predicted given AF2 models were not significantly more accurate than those predicted given traditional models and were much less accurate than those predicted by docking computationally to experimentally determined protein structures. Our results provide guidelines as to how AF2 models should—and should not—be used for effective ligand binding prediction. Our findings also suggest opportunities for improving structure prediction methods to maximize their impact on drug discovery.
Results
Selection of proteins and models to ensure a fair comparison
Evaluating the accuracy of predicted ligand binding poses requires that we examine protein– ligand complexes whose structures have been determined experimentally. We wish to ensure, however, that the predicted structures of a given protein are not informed by experimentally determined structures of that same protein.
AF2 and other recent neural-network-based protein structure prediction methods use experimentally determined protein structures in two ways: first, to train the neural network and second, as templates for prediction of individual protein structures (Baek et al., 2021; Jumper et al., 2021). The AF2 neural network was trained on structures in the Protein Data Bank (PDB)(Berman et al., 2000) as of April 30, 2018 so we evaluated structural models of proteins for which no experimentally determined structure was available as of that date. In addition, when generating models using AF2, we used only structures that were available on that date as templates (see Methods). For a fair comparison, we also ensured that the traditional template-based models we used were not informed by any structures that became available after that date. In particular, we used traditional models that were published before April 30, 2018.
We selected all proteins, ligands, and structural models used in this study in a systematic manner (see Methods). We focused on one class of drug targets—G protein–coupled receptors (GPCRs)—for three reasons. First, GPCRs represent the largest class of drug targets by a substantial margin, with 35% of FDA approved drugs targeting a GPCR (Sriram & Insel, 2018). Second, GCPR binding pockets are very diverse, reflecting the fact that GPCRs have evolved to bind very different ligands with high specificity (Venkatakrishnan et al., 2013). Third, the GPCRdb project maintains a historical database of template-based models of GPCRs (Pándy-Szekeres et al., 2018). By selecting the template-based models listed in GPCRdb in April 2018, we ensured that these models were not informed by any structures that became available after April 30, 2018.
Binding pocket structures are much more accurate in AF2 models than traditional models
Because proteins are flexible, each protein can adopt multiple structures. In particular, the structure of a protein—especially the structure of the binding pocket—depends on which ligand is bound. To quantify this natural variation, we compared all pairs of experimentally determined structures of the same protein to one another, using root mean squared deviation (RMSD) as a metric (see Methods).
AF2 does not allow one to specify a bound ligand when generating a protein model, and the template-based models listed in GPCRdb were also generated without specification of a bound ligand. We thus evaluated the accuracy of each model by computing its RMSD to that of all available experimental structures of the same protein. We compared the resulting distribution of RMSDs to the distribution of RMSDs between structures of the same protein with different ligands bound.
As expected based on previously reported results for other proteins (Jumper et al., 2021), we find that the global structural accuracy of the AF2 models is substantially better than that of the traditional template-based models. In particular, when computing RMSDs based on all non-hydrogen atoms in each protein, we find a median RMSD of 2.9 Å between AF2 models and corresponding experimentally determined structures, compared to a median RMSD of 4.3 Å for traditional models (Supplementary Figure S1).
Next, we turn our attention to the orthosteric binding pocket of each protein—that is, the region where native ligands and most other ligands, including those in our dataset, bind. AF2 was trained to optimize global structural accuracy, with an emphasis on correctly predicting the structure of the protein backbone. The accuracy of binding pocket prediction, on the other hand depends heavily on side-chain conformations in this local region. Nevertheless, we find that AF2 predictions of binding pocket structures are typically very accurate.
In fact, the binding pocket RMSD between an AF2 model and an experimentally determined structure is typically nearly as low as the RMSD between two experimentally determined structures of the same protein with different ligands bound (Figure 1). By contrast, binding pockets in the traditional template-based models are much less accurate, with a median RMSD of 3.3 Å for traditional models vs. 1.3 Å for AF2 models. We note that the binding pockets of a few AF2 models are highly inaccurate (approximately 5 Å RMSD), as is the case for several of the traditional models.
Binding pose prediction using AlphaFold 2 models or traditional models yields similar accuracy
Next, we assess the accuracy of ligand binding poses predicted by computational docking to AF2 models and traditional template-based models. For each ligand we consider, the binding pose to a target protein is known based on an experimentally determined structure of the ligand bound to the protein, which we call the reference structure. Using industry-standard software, we docked each ligand to both AF2 and GPCRdb models of the protein. A predicted pose is considered correct if its RMSD from the experimentally determined pose is ≤2.0 Å (Fig. 2), a widely used criterion for correct pose prediction (Erickson et al., 2004; Gohlke et al., 2000; Paggi et al., 2021).
For comparison, we also dock each ligand to structures of the same protein determined experimentally with other ligands bound. Note that when calculating pose prediction accuracy (Fig. 2), we exclude cases where the ligand is docked back to the reference structure; such “self-docking” yields much higher accuracy (Supplementary Figure S2) but is of little practical utility, because in practice one wishes to predict binding poses that have not already been determined experimentally.
Strikingly, binding pose prediction accuracy was similar when using AF2 models or traditional template-based models, despite the fact that binding pocket structures were substantially more accurate in AF2 models. Although the fraction of ligands docked correctly was slightly higher when using AF2 models (16%) than when using traditional models (11%), this difference was not statistically significant (P > 0.5). On the other hand, binding pose prediction accuracy was far higher when docking to experimentally determined protein structures (48%), even though these structures were determined in complex with ligands different from those being docked.
The docked poses analyzed above were determined with the widely used commercial docking software package Glide, run in SP mode (for “standard precision”) (Friesner et al., 2004). To verify the robustness of our results, we repeated all docking experiments using a completely different docking software package—Rosetta docking (Park et al., 2021)—as well as with Glide run in XP mode (for “extra precision”) (Friesner et al., 2006).In both cases, we again found that, when used for ligand binding pose prediction, AF2 models substantially underperformed experimentally determined structures and did not significantly outperform traditional models (Supplementary Figure S3). In fact, the difference in binding pose prediction accuracy between AF2 models and traditional models was even smaller when using Rosetta docking or Glide XP than when using Glide SP.
Closer look at discrepancy between structural accuracy and pose prediction accuracy
The results of the previous two sections contrast sharply with one another. AF2 models nearly match experimentally determined structures—and are much better than traditional template-based models—in binding pocket accuracy, as measured by a standard structural metric. Yet AF2 models fare much worse than experimentally determined structures—do not significantly outperform traditional models—when used to predict ligand binding poses. Figures 3 and 4 provide illustrative examples.
To further quantify these results, we compare pose prediction accuracy for structures and models with similar binding pocket accuracy. In particular, we calculate pose prediction accuracy as a function of binding pocket accuracy (RMSD) for both experimentally determined structures and models. As expected, we find that average pose prediction accuracy increases as binding pocket accuracy increases (i.e., RMSD to reference structure decreases). This trend holds for experimentally determined structures, AF2 models, and traditional template-based models (Figure 5 and Supplementary Figure S4). Yet for the same binding pocket accuracy (RMSD from the reference structure), AF2 models yield lower average pose prediction accuracy than experimentally determined structures (Fig. 3). By contrast, in cases where traditional models and experimentally determined structures have similar binding pocket accuracies, they yield similar pose prediction accuracies (Supplementary Figure S4)
We also considered the possibility that the improved performance of experimentally determined structures relative to AF2 models might be because, in some cases, the structure used for docking was determined with a bound ligand similar (though not identical) to the ligand being docked. Eliminating such cases from consideration does lead to decreases in both aggregate binding pocket accuracy and pose prediction accuracy of experimentally determined structures, but experimentally determined structures continue to yield significantly more accurate pose predictions than AF2 models (P < 0.01) (Supplementary Figures S2, S3, S5).
Discussion
Several recent papers have concluded that AF2 models fall short of experimentally determined structures when used for ligand docking (Díaz-Rovira et al., 2023; He et al., 2022; Heo & Feig, 2022; Scardino et al., 2022). Our results agree with this conclusion but go beyond it in several ways. We compare AF2 models and traditional template-based models, rigorously ensuring that none of these models was informed by experimentally determined structures of the protein being modeled. We find that, in terms of structural accuracy of the binding pocket, AF2 models are much better than traditional models; indeed, the RMSD between an AF2 model and an experimentally determined structure is typically comparable to the RMSD between two structures determined experimentally with different ligands bound. Yet, when used for docking, AF2 models yield pose prediction accuracy similar to that of traditional models and much worse than that of experimentally determined structures.
A few caveats are in order. First, building a traditional template-based model is not always possible. We only considered template-based models in cases where a structure was available for another protein with at least 40% sequence identity. However, 80% of human drug targets have at least 50% sequence identity to a protein whose structure was known in 2017 (Somody et al., 2017), and that number is even higher today. In addition, we note that the traditional models we used were generated relatively quickly by an academic group along with models for hundreds of other proteins. An expert working on a drug discovery project could frequently build a better template-based model—for example, by examining the predictive utility of several models (Carlsson et al., 2011; Haddad et al., 2020).
Second, our study examined only GPCRs. The results might in principle be different for other classes of drug targets. However, GPCRs have very diverse binding pockets, which have evolved to binding an extremely broad range of ligands, ranging from very small molecules to peptides and proteins, with high specificity (Venkatakrishnan et al., 2013). Our conclusions thus likely apply to many non-GPCR drug targets—and GPCR targets alone account for roughly half of drug discovery projects. We also note that, for GPCRs specifically, one can often improve docking performance by using a model or an experimentally determined structure in the activation state to which a given ligand preferentially binds (Heo & Feig, 2022; S. Lee et al., 2022). In this study, we did not limit the ligands docked to each structure or model to those that preferentially bind one specific activation state. We made this choice for several reasons: many other classes of drug targets do not have well-defined activation states; in practical applications, the preferred activation state for a given ligand may not be known when one docks it; and AF2 does not produce models in specific activation states by default.
Third, we have not examined performance of the full range of available computational docking methods (Pagadala et al., 2017). Our results are, however, consistent across the three docking methods we examined: Glide SP, Glide XP, and Rosetta docking. In each case, AF2 models yield docking accuracy similar to that of traditional models and substantially worse than that of experimentally determined structures.
Our results have important implications for practitioners of structure-based drug discovery. Our findings suggest that, despite dramatic recent improvements in protein structure prediction, structural models (in particular, AF2 models) yield substantially poorer accuracy than experimentally determined structures in prediction of ligand binding modes. Moreover, when a reasonable structural template is available—as is typically the case—AF2 models should not be expected to yield significantly better pose prediction accuracy than traditional models. Indeed, with sufficient effort, an expert may well be able to build a traditional template-based model that yields better performance than an AF2 model.
Despite these findings, we believe that AF2 and other recently developed protein structure prediction methods will prove valuable in certain structure-based drug discovery efforts. Up-to-date AF2 models for any human protein are readily available for download (Tunyasuvunakool et al., 2021; Varadi et al., 2022). By contrast, expertise is required to build a decent template-based model, and up-to-date, downloadable repositories of such models are not available for all drug targets. Also, in the relatively rare cases when no structural template is available for a drug target, approaches like AF2 may be the only realistic option short of solving a structure experimentally.
Our results also point to opportunities for developing improved computational modeling methods. Existing deep-learning methods for protein structure prediction were developed with the aim of maximizing structural accuracy for models. We find that the RMSD of a model—a classic structural accuracy metric—is not a good predictor of the accuracy that model yields for pose prediction. Future protein structure prediction methods might instead be designed to maximize utility for ligand binding prediction, while still exploiting the deep learning advances of AF2 and related recent methods. We also note that the vast majority of test cases used in the design of currently available docking software involved experimentally determined protein structures. One might be able to redesign docking methods to yield better performance given computationally predicted models.
Methods
Protein and ligand selection
We selected structures from the aggregated list of all experimentally determined human GPCR structures from GPCRdb (Isberg et al., 2014). We removed all proteins for which a structure was published in the PDB before April 30, 2018, including two Class C GPCRs for which structures of the extracellular domain (to which ligands bind) had been published before that date. We also removed proteins for which structures were available in complex with fewer than two unique orthosteric ligands. This left us with 18 GPCRs (17 class A, one class B). The full list of proteins is in Supplementary Table 1.
Obtaining structural models
AlphaFold 2
For each protein, we took the full protein sequence from Uniprot (The UniProt Consortium, 2023) to generate 5 AF2 models, as was done for CASP(Jumper et al., 2021), and picked the top-scoring prediction as our model. We set the template cutoff date to 2018-04-30.
GPCRdb
We downloaded template-based models from the GPCRdb archive dated 2018-04-06. We used all the inactive-state and active-state models available, and averaged results as described in the statistical tools section below. We excluded models for which the minimum sequence identity of the templates was below 40%, as such template-based models are typically not used for drug binding predictions.
This led to exclusion of models for four GPCRs (AGRG3, TA2R, PE2R2, PE2R4). GPCRdb did not include models for two of the GPCRs (GPBAR and PE2R3).
Ligand preparation
Ligands were extracted from PDB structures using the Schrödinger Python API and then manually inspected to make sure we had chosen the ligand at the orthosteric site. With the same API, ligands were converted to SMILES strings. Ligands were then prepared with Schrödinger’s LigPrep with default command line parameters (Schrödinger Release 2021-1, 2021).
Ligand similarity was defined as a ratio of the size of the maximum common substructure to the size of the smaller molecule. Ligand pairs for which this ratio was less than 0.5 were deemed very different ligands.
Protein preparation
Experimentally determined structures were downloaded from the PDB. Only a single chain containing the ligand was kept, and all waters were removed. All structures and models were prepared with Schrödinger Protein Preparation Wizard (Schrödinger Release 2021-1, 2021) following the same protocols as Paggi et al. (2021). With this process, all structures underwent a minimization this restrains all non-hydrogen atoms to 0.3 Å from the initial structure with a harmonic potential. All the experimentally determined structures were determined with a ligand bound, and we retained this ligand during minimization. Computationally predicted models did not include a ligand.
Glide Docking
For Glide XP and Glide SP docking, we follow the docking protocol described in Paggi et al. (2021). The grid is centered at the geometric centroid of the ligand and is defined with an inner box with 15 Å sides and outer box with 30 Å sides. For predicted structural models the center of the box is determined by aligning the model to an experimentally determined structure of that protein and using the centroid of its ligand. For this alignment, we pick the structure with the alphabetically first PDB code.
Rosetta Docking
For Rosetta docking, we used the GALigandDock protocol (Park et al., 2021). To prepare the proteins, PyMol (Schrödinger, LLC, 2015) was used to remove heteroatoms and all alternative locations for each atom. CONECT information was included. UCSF Chimera v1.16 (Pettersen et al., 2004) was used to initially remove all hydrogens, followed by their Dock Prep software to prepare the structure for docking.
For ligands, Open Babel v2.4.0 (O’Boyle et al., 2011) was used to generate 3-D structures from ligand SMILES and add hydrogens at a pH of 7 (O’Boyle et al., 2011). Ambertools v22.0 (Case, 2022) was used to add AM1-BCC partial charges. The ligand was translated such that the center of mass of the ligand was positioned at center of the binding pocket of the prepared structure. The center of the binding pocket was defined as the center of mass of the ligand in the experimentally determined structure. Models were aligned to the experimentally determined structure of the protein which had the alphabetically first PDB code. This structure’s ligand center of mass was used to define the model’s binding pocket.
Structural Comparisons
To calculate ligand pose RMSD, structures were first aligned on amino acid residues within15 Å of bound orthosteric ligands, using Schrödinger’s structalign tool (Schrödinger Release 2021-1, 2021). This alignment was used to calculate the RMSD of each docked ligand pose from the reference ligand pose.
Binding pocket RMSDs were calculated with a PyMOL script, considering all residues that are within 5 Å of the ligand in the reference structure (for both alignment and RMSD calculation). We included all non-hydrogen atoms in this calculation, except that for the backbone-only binding-pocket RMSDs shown in Supplementary Figure S5, we only backbone atoms.
We computed full-structure RMSDs with a similar PyMOL script, but taking into account all non-hydrogen atoms in the protein.
In Figure 4, Figure 5 and Supplementary Figure S5, we highlight residues in the binding pocket whose positions differ most from the reference structure. To identify these residues, we aligned to the reference structure the structure and model (or the two models) being docked to. For each structure/model, we computed the RMSD for each residue within 5 Å of the ligand, and then for each residue determined the maximum RMSD across the two structures/models. We selected the residues with the largest maximum RMSDs.
Statistical tools
P values were computed with two sided paired t-tests, using SciPy (Virtanen et al., 2020). Bootstrapping 90% confidence intervals were computed with the default 9999 resamples, also using SciPy.
In Figure 2, the docking accuracy is calculated as a weighted average across all docking results. The weighting for the average is such that each ligand is equally represented in the average. That is, there were cases were proteins with multiple experimental structures or traditional template models available for a ligand to dock into. The average is calculated as a weighted average in which each pose prediction is weighted as the inverse of the number of template-based models or experimentally determined structures the given ligand was docked into.
In Figure 5 and Supplementary Figure S4, the smoothing function was created by running kernel smoothing over docking outcomes. The smoothing was done over data such that each data point was the binding pocket RMSD, and the binary value indicating whether or not the predicted poses was correct. An Epanechnikov kernel (Hastie et al., 2009) was used, with a width of 0.25 Å. To avoid inaccurate boundary condition behaviors each end the kernel was only evaluated when the center of the kernel overlapped with the first or last data point on the X-axis. To calculate statistical significance and P values, a bootstrapping significance test was conducted for each interval on the X-axis. Additionally, in Supplementary Figure S4, we show 90% confidence intervals that are also computed with bootstrapping.
Acknowledgements
We thank Joseph Paggi, John Wang, Akshat Nigam, and all members of the Dror lab for assistance and insightful comments. This work was supported by Novo Nordisk and an NSF Graduate Research Fellowship to M.K..
References
- The Process of Structure-Based Drug DesignChemistry & Biology 10:787–797https://doi.org/10.1016/j.chembiol.2003.09.002
- Accurate prediction of protein structures and interactions using a three-track neural networkScience 373:871–876https://doi.org/10.1126/science.abj8754
- The Protein Data BankNucleic Acids Research 28:235–242https://doi.org/10.1093/nar/28.1.235
- Current assessment of docking into GPCR crystal structures and homology models: Successes, challenges, and guidelinesJournal of Chemical Information and Modeling 52:3263–3277https://doi.org/10.1021/ci300411b
- Predicting the accuracy of protein–ligand docking on homology modelsJournal of Computational Chemistry 32:81–98https://doi.org/10.1002/jcc.21601
- Ligand discovery from a dopamine D3 receptor homology model and crystal structureNature Chemical Biology 7https://doi.org/10.1038/nchembio.662
- Are Deep Learning Structural Models Sufficiently Accurate for Virtual Screening? Application of Docking Algorithms to AlphaFold2 Predicted StructuresJournal of Chemical Information and Modeling 63:1668–1674https://doi.org/10.1021/acs.jcim.2c01270
- Lessons in Molecular Recognition: The Effects of Ligand and Protein Flexibility on Molecular Docking AccuracyJournal of Medicinal Chemistry 47:45–55https://doi.org/10.1021/jm030209y
- Molecular Docking and Structure-Based Drug Design StrategiesMolecules 20:13384–13421https://doi.org/10.3390/molecules200713384
- Glide: A New Approach for Rapid, Accurate Docking and Scoring. 1. Method and Assessment of Docking AccuracyJournal of Medicinal Chemistry 47:1739–1749https://doi.org/10.1021/jm0306430
- Extra Precision Glide: Docking and Scoring Incorporating a Model of Hydrophobic Enclosure for Protein−Ligand ComplexesJournal of Medicinal Chemistry 49:6177–6196https://doi.org/10.1021/jm051256o
- Knowledge-based scoring function to predict protein-ligand interactions11Edited by R. HuberJournal of Molecular Biology 295:337–356https://doi.org/10.1006/jmbi.1999.3371
- Ten quick tips for homology modeling of high-resolution protein 3D structuresPLoS Computational Biology 16https://doi.org/10.1371/journal.pcbi.1007449
- The elements of statistical learning: Data mining, inference, and prediction
- AlphaFold2 versus experimental structures: Evaluation on G protein-coupled receptors:1–7https://doi.org/10.1038/s41401-022-00938-y
- Multi-state modeling of G-protein coupled receptors at experimental accuracyProteins: Structure, Function, and Bioinformatics 90:1873–1885https://doi.org/10.1002/prot.26382
- Utility of homology models in the drug discovery processDrug Discovery Today 9:659–669https://doi.org/10.1016/S1359-6446(04)03196-4
- GPCRDB: An information system for G protein-coupled receptorsNucleic Acids Research 42:D422–D425https://doi.org/10.1093/nar/gkt1255
- Highly accurate protein structure prediction with AlphaFoldNature 596:583–589https://doi.org/10.1038/s41586-021-03819-2
- Docking and chemoinformatic screens for new ligands and targetsCurrent Opinion in Biotechnology 20:429–436https://doi.org/10.1016/j.copbio.2009.08.003
- Critical assessment of methods of protein structure prediction (CASP)-Round XIVProteins 89:1607–1617https://doi.org/10.1002/prot.26237
- Comparative studies of AlphaFold, RoseTTAFold and Modeller: A case study involving the use of G-protein-coupled receptorsBriefings in Bioinformatics 23https://doi.org/10.1093/bib/bbac308
- Evaluating GPCR modeling and docking strategies in the era of deep learning-based protein structure predictionComputational and Structural Biotechnology Journal 21:158–167https://doi.org/10.1016/j.csbj.2022.11.057
- Liang, S., Liang, Z., Wu, Z., Huang, F., Wang, X., Tan, Z., He, R., Lu, Z., Cai, Y., Huang, B., & Wang, X. (2022). A benchmark study of protein folding algorithms on nanobodies (p. 2022.08.07.503071). bioRxiv. 10.1101/2022.08.07.503071https://doi.org/10.1101/2022.08.07.503071
- AlphaFold Excitement
- Protein X-ray Crystallography and Drug DiscoveryMolecules 25https://doi.org/10.3390/molecules25051030
- Open Babel: An open chemical toolboxJournal of Cheminformatics 3https://doi.org/10.1186/1758-2946-3-33
- Structural biology is solved—Now what?Nature Methods 19https://doi.org/10.1038/s41592-021-01357-3
- Software for molecular docking: A reviewBiophysical Reviews 9:91–102https://doi.org/10.1007/s12551-016-0247-1
- Leveraging nonstructural data to predict structures and affinities of protein–ligand complexesProceedings of the National Academy of Sciences 118https://doi.org/10.1073/pnas.2112621118
- GPCRdb in 2018: Adding GPCR structure models and ligandsNucleic Acids Research 46:D440–D446https://doi.org/10.1093/nar/gkx1109
- Force Field Optimization Guided by Small Molecule Crystal Lattice Data Enables Consistent Sub-Angstrom Protein– Ligand DockingJournal of Chemical Theory and Computation 17:2000–2010https://doi.org/10.1021/acs.jctc.0c01184
- UCSF Chimera—A visualization system for exploratory research and analysisJournal of Computational Chemistry 25:1605–1612https://doi.org/10.1002/jcc.20084
- Molecular Docking: Shifting Paradigms in Drug DiscoveryInternational Journal of Molecular Sciences 20https://doi.org/10.3390/ijms20184331
- Qiao, Z., Nie, W., Vahdat, A., Miller, T. F., & Anandkumar, A. (2022). Dynamic-Backbone Protein-Ligand Structure Prediction with Multiscale Generative Diffusion Models. 10.48550/ARXIV.2209.15171https://doi.org/10.48550/ARXIV.2209.15171
- Scardino, V., Di Filippo, J. I., & Cavasotto, C. (2022). How good are AlphaFold models for docking-based virtual screening? [Preprint]. Chemistry. 10.26434/chemrxiv-2022-sgj8chttps://doi.org/10.26434/chemrxiv-2022-sgj8c
- The PyMOL Molecular Graphics System, Version 1.8
- Schrödinger, LLC
- The challenge of protein structure determination—Lessons from structural genomicsProtein Science : A Publication of the Protein Society 16:2472–2482https://doi.org/10.1110/ps.073037907
- G Protein-Coupled Receptors as Targets for Approved Drugs: How Many Targets and How Many Drugs?Molecular Pharmacology 93:251–258https://doi.org/10.1124/mol.117.111062
- AlphaFold Models of Small Proteins Rival the Accuracy of Solution NMR StructuresFrontiers in Molecular Biosciences 9https://doi.org/10.3389/fmolb.2022.877000
- UniProt: The Universal Protein Knowledgebase in 2023Nucleic Acids Research 51:D523–D531https://doi.org/10.1093/nar/gkac1052
- AlphaFold heralds a data-driven revolution in biology and medicineNature Medicine 27https://doi.org/10.1038/s41591-021-01533-0
- AlphaFold Is The Most Important Achievement In AI—Ever
- Highly accurate protein structure prediction for the human proteomeNature 596https://doi.org/10.1038/s41586-021-03828-1
- AlphaFold Protein Structure Database: Massively expanding the structural coverage of protein-sequence space with high-accuracy modelsNucleic Acids Research 50:D439–D444https://doi.org/10.1093/nar/gkab1061
- Molecular signatures of G-protein-coupled receptorsNature 494https://doi.org/10.1038/nature11896
- SciPy 1.0: Fundamental Algorithms for Scientific Computing in PythonNature Methods 17:261–272https://doi.org/10.1038/s41592-019-0686-2
- Homology Modeling a Fast Tool for Drug Discovery: Current PerspectivesIndian Journal of Pharmaceutical Sciences 74:1–17https://doi.org/10.4103/0250-474X.102537
- Essential considerations for using protein–ligand structures in drug discoveryDrug Discovery Today 17:1270–1281https://doi.org/10.1016/j.drudis.2012.06.011
- Benchmarking AlphaFold-enabled molecular docking predictions for antibiotic discoveryMolecular Systems Biology 18https://doi.org/10.15252/msb.202211081
Article and author information
Author information
Version history
- Preprint posted:
- Sent for peer review:
- Reviewed Preprint version 1:
- Version of Record published:
Copyright
© 2023, Karelina et al.
This article is distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use and redistribution provided that the original author and source are credited.
Metrics
- views
- 7,388
- downloads
- 560
- citations
- 44
Views, downloads and citations are aggregated across all versions of this paper published by eLife.