Zapit: Open Source Laser-Scanning Photostimulation For Neuroscience

Reviewer #3 (Public review):

Zappit is an open-source implementation of arbitrary-access laser-scanning optogenetics for manipulation of neuronal activity in mice. As the method requires expertise ranging from optics, hardware control and programming, the authors make the point that this powerful strategy is underutilized in the field, and put forward a well-documented modular hardware and software platform aligned to the Allen Mouse Brain Atlas aimed at enabling the larger scientific community to use this approach (democratizing) for controlling cortical activity during behavior in mice.

The authors favor a galvanometric approach to laser targeting. The system is inexpensive, easy to build, well-documented and user friendly (Matlab based GUI and GitHub repository). The photo-stimulation laser is directed into an X-Y galvo scanner targeted to the specimen using a dichroic mirror and focused on the sample using a Plössl lens as scan lens which is also used as an objective. The scan lens/objective images the specimen onto a camera via tube lens (also a Plössl lens) in a 0.5X magnification ensuring to fit the extent of the mouse brain onto the camera sensor (USB-3 Basler acA120-40um).

The authors report short and reproducible onsite time (~ 0.5 ms) and block (mask) the stimulation source using the laser analog control (~0.5 ms). The system is reliable, aiming at up to 20 stimulation sites per sequence considered as quasi-simultaneous (10 ms). They minimize rebound by gentle ramping down of stimulation over 250 ms.

The system is fast to calibrate by mapping scanner positions to pixel space in the camera space and mapping stereotaxic coordinate onto the image of the exposed skull. The theoretical x-y PSF is 70 µm (measured ~90µm) while the authors make the point that due to scattering the photo-stimulation spot size (lateral extent) is about 1 mm in diameter. This is what they also observe in electrophysiological recordings using silicon probes. The effective radius of inactivation depends on laser power, but was about 1 mm for laser powers (1-2-4 mW) on which the authors observed significant behavioral perturbations - in several tasks: 1) a delayed response somatosensory discrimination, 2) a visual detection task assessing changes in temporal frequency of a drifting visual stimulus; and 3) a visual discrimination (International Brain Laboratory task) in which mice were tasked to report the location of visual stimuli by turning a wheel. As proof of principle, the authors used a photo-stimulation set composed of 52 bilateral sites positioned at 0.5 mm interval covering a large network of frontal, motor and somatosensory cortical areas. Indeed, photo-inhibition of frontal motor cortex sites produced robust increases in reaction time. In contrast, stimulation at other motor and somatosensory sites produced modest, but significant decreases in reaction times.

While the approach is not novel, it does serve the need of better disseminating this technique in the research community. Overall, the Zappit is well-documented and easy to build and use, and will have impact in increasing robust use of site directed photo-stimulation (exciting/inhibiting ensembles of neurons at particular ~1 mm size regions of interests across the dorsal surface of the brain). The authors also note that the axial resolution is ~1.5 mm.

Concerns & comments:

(1) While the authors argue that it offers the best utility to affordability trade-off - faster than motorized drivers and require much less power than DMDs (100X) and less expensive/easier to use compared to SLMs, in the current form, the manuscript does not clearly list the limitations of the approach. At such, in my opinion, the authors should include side by side comparisons (perhaps as a table). For example, clear statements should be included with respect to comparisons in lateral (x-y), axial (z) spatial resolution, as well as temporal sequential aspect of Zappit and other photo-stimulation techniques involving DMDs or SLMs.

(2) Is power really a limitation in terms of the laser sources? Or is this a disadvantage mainly because using less power has beneficial effects on the tissue health? It may be useful to provide metrics of comparisons along these lines between Zappit and DMD-based approaches.

(3) Arbitrary-scanning vs random scanning may be more appropriate to describe to strategy.

Reviewer #1 (Public review):

Lohse et al. describe an open-source system for laser scanning photostimulation (LSPS) in head-fixed animals. Although similar systems have been developed and used by different groups, Zapit provides an open-source solution requiring few custom parts and minimal coding. This tool can clearly facilitate and speed the adoption of LSPS, particularly for the increasingly used purpose of mapping the effects of focal cortical silencing during behavior. Other potential uses include mapping optogenetically evoked movements and selectively activating genetically labeled neuronal subtypes of interest in the cortex. The design is well thought through, and the presentation is mostly clear and well written.

In general, the more modular such a system is, the better, in terms of compatibility with existing hardware and software that potential users may already have purchased - laser, galvo, and camera in particular. The system has struck a reasonable balance between allowing modularity and providing an integrated complete package, but even more flexibility would be welcome for potential users looking to cut costs, as would clearer presentation of such flexibility as already exists.

Comments and suggestions are mostly minor, as follows.

(1) Command signals:

How is the relationship between analog voltage commands and laser power determined? Is this assumed (or required) to be linear (as Figure 7F implies)? Usability and modularity would be improved by an option to measure or provide a calibration curve for systems with a nonlinear mapping between command voltage and laser power.

For the grid calibration step, how is the initial mapping from galvo voltage commands to image position determined? Presumably, some sort of initial guess or calculation based on the hardware specifications is needed for the grid calibration to be feasible. Also, how are the number of grid lines and the distance between them determined?

Why is the mapping between analog outputs and hardware (galvos, laser, masking light) fixed? This would be trivial to make configurable and allow labs with existing setups to adopt Zapit without rewiring existing hardware.

(2) Laser and optics:

In Figure 1, the authors should consider explaining the scanning principle schematically, i.e., depicting how tilting of the scan mirrors translates via the scan lens into beam displacement in the specimen plane. Perhaps Zemax can be used for accurate rendering.

Since the unexpanded beam greatly under-fills the back aperture of the lens, the z resolution is presumably terrible - which is good! That is, for the purposes of LSPS, this advantageously avoids focus-dependent effects, which might otherwise arise due to (e.g.) skull curvature. The authors should consider pointing this out, as well as providing an estimate of the z resolution.

What is the working distance?

Reviewer #2 (Public review):

Summary:

In this work, Lohse and colleagues develop a system for doing targeted photostimulation in mouse cortex. The system uses a camera image to target laser stimulation to stereotactically defined locations in mouse dorsal cortex.

Strengths:

The hardware is well designed, and the software is well documented and supported. The build guide and well-documented software package should allow for simple implementation of the technology. Without a doubt, this is a valuable community resource for the circuit neuroscience field.

Weaknesses:

No weaknesses were identified by this reviewer.