Introduction

Transgenesis, which is the specific and heritable introduction of foreign DNA into genomes, has been a central tool for functional analysis and genetic engineering for nearly 40 years. The power of transgenesis is due in part to the wide variety of assays and techniques that are built upon controlled introduction of novel DNA sequences into a native genome. While there are many uses for transgenesis, in practice most can be grouped into those inserting a small number of known sequences (specific transgenesis) and those introducing many sequence variants from experimental libraries (exploratory transgenesis). While the ability to perform specific transgenesis has become a de facto requirement for all model organisms, exploratory transgenesis remains effectively limited to single-cell models (both prokaryotic and eukaryotic) caused by biological limitations generated by inheritance in multicellular organisms. In single-cell models, high-throughput transgenesis has been used for exploratory sampling of sequence space using protein interaction libraries (Joung et al., 2000), barcode-lineage tracking libraries (Levy et al., 2015; Nguyen Ba et al., 2019), directed evolution (Packer and Liu, 2015), synthetic promoter library screens (Wu et al., 2019), and mutagenesis screens (Bock et al., 2022; Erwood et al., 2022; Kim et al., 2022; Sánchez-Rivera et al., 2022). Despite the usefulness of such experiments in single-celled systems, either in microorganisms or in cell culture, increasing transgenic throughput in multicellular models holds the potential to expand the impact of exploratory transgenesis in functional domains, such as inter-tissue signaling, neuronal health, and animal behavior, that are dependent on multicellular interactions and therefore difficult to replicate in single-cell models.

Exploratory transgenesis in single-cell models has been facilitated by the availability of in-vitro-generated DNA libraries, selectable markers, plasmids, in vivo homologous recombination, and most importantly, the ability to massively parallelize transgenesis using microbial transformation or eukaryotic cell transfection/transduction. Currently, there is no practical means to make populations of uniquely transgenic individuals from sequence libraries at a similar scale in animal systems due to the Weismann Barrier (Weismann, 1893): the split between soma and germline. The requirement that the germline be accessible and editable has forced animal systems into a transgenic bottleneck compared to single-cell systems because it is very difficult to introduce exogenous DNA directly into the germline in a high-throughput manner, relying instead on injection, bombardment, or some other physical intervention. This low-throughput limitation in animals dramatically reduces the sequence diversity that can be sampled, effectively preventing large-scale exploratory experiments from being performed. Attempts have been made to parallelize transgenic creation in multicellular model organisms, for example, the development of Brainbow (Livet et al., 2007; Weissman and Pan, 2015), ifgMosaic analysis (Pontes-Quero et al., 2017), P[acman] libraries in Drosophila (Venken et al., 2009), and multiple types of transformation in plants (Ismagul et al., 2018; Xu et al., 2022). In Caenorhabditis elegans, CRISPR technology combined with custom engineered sites within the genome (“landing pads”) has facilitated the generation of single-copy integrations (Malaiwong et al., 2023; Nonet, 2020, 2021; Silva-García et al., 2019; Stevenson et al., 2020; Vicencio et al., 2019), and attempts have been made to multiplex transgenesis using traditional integration methods in conjunction with specialized landing pad systems (Gilleland et al., 2015; Kaymak et al., 2016; Mouridi et al., 2022; Radman et al., 2013). While these efforts have increased throughput over standard single copy integration methods, throughput still remains too low for effective exploratory transgenesis, and in some cases requires significant additional labor, cost, equipment and/or expertise.

Here we present “Transgenic Arrays Resulting in Diversity of Integrated Sequences” (TARDIS) (Stevenson et al., 2021), a simple yet powerful alternative to traditional single-copy transgenesis. TARDIS greatly expands throughput by explicitly separating and reordering of the conceptual steps of transgenesis (Figure 1). To increase throughput, TARDIS begins with an in vitro generated DNA sequence library that is introduced into germ cells via traditional low throughput methods (i.e., germline transformation, Fig 1). While traditional transgenesis typically couples the physical introduction of DNA into cells with the integration of a selected sequence from the original library, the DNA sequences in TARDIS are designed to be incorporated in large numbers into diverse, heritable sub-libraries (TARDIS libraries), rather than be directly integrated into the desired genomic locus. In addition to the sequence library, a functioning selectable marker is also included to stabilize the inheritance of the TARDIS library over generations. These TARDIS libraries function to create “metaploidy” – expanding the total number of alleles available for inheritance, essentially making the worm genetically “bigger on the inside.” TARDIS library-bearing animals are then allowed to propagate under selection to generate a large population of TARDIS library carriers. After population expansion, genome integration of a single sequence unit is performed by inducing a double strand break at a genetically engineered landing pad. This landing pad is designed to both integrate a sequence unit and act as a second selectable marker. We chose C. elegans to validate the TARDIS approach because C. elegans naturally form extrachromosomal arrays that can be several megabases in size (Carlton et al., 2022; Lin et al., 2021; Mello et al., 1991; Stinchcomb et al., 1985) from injected DNA, which simplifies the generation of heritable “TARDIS library arrays” (TLA) that encompass sequence significant diversity.

Figure 1:

We demonstrate the functionality of TARDIS for two use cases: unique animal barcoding and promoter library transgenesis. Barcoding has been widely adopted in microbial systems for evolutionary lineage tracking (Jahn et al., 2018; Levy et al., 2015; Nguyen Ba et al., 2019) and for developmental lineage tracking in animals (Kebschull and Zador, 2018; McKenna et al., 2016). In microbial systems, barcode libraries have relied on highly diverse randomized oligo libraries, as compared to animal systems, which have relied on CRE recombinases or randomized Cas9-induced mutations. Here we present a novel TARDIS barcoding system for an animal model which mimics the scope and diversity previously only possible using microbial systems. Our results show that large, heritable libraries containing thousands of barcodes can be created and maintained as extrachromosomal arrays. Individual sequences are selected and removed from the library upon experimental induction of Cas9 in a proportion consistent with the composition of the TLA with rare overrepresented sequences. We found that TARDIS is also compatible with the integration of large promoters and can be used to simultaneously integrate promoters into multiple genomic locations, providing a tool for multiple insertions at defined locations across the genome. While we demonstrate the system’s advantages in C. elegans, in principle, the system is adaptable for any situation where the sequences for integration can be introduced with high diversity and heritability, and where a genomic site for integration can be made or is available.

Results

Generation of barcode landing pad

We designed a specific landing pad for the introduction and selection of small barcode fragments from high-diversity, multiplexed barcode libraries (Figure 2). This landing pad was designed to be targeted by Cas9 and requires perfect integration on both the 5’ and 3’ ends of a synthetic intron for functional hygromycin B resistance. Current split selection landing pads only provide selection on one side of the double-strand break, which can result in a small percentage of incomplete integrations (Stevenson et al., 2020). To fully test a large library approach, the requirement of genotyping to identify correct integrations must be overcome. A split-selection, hygromycin resistance (HygR) system was chosen for its simplicity and integration-specific selection. A unique synthetic CRISPR guide RNA target sequence was created by removing coding sequence on both sides of an artificial intron, resulting in a non-functional HygR gene. By removing critical coding sequence on both sides of the gene, only ‘perfect’ integration events will result in hygromycin resistance (Figure 2A). The synthetic landing pad was integrated at Chromosome II: 8,420,157, which has previously been shown to be permissive for germline expression (Dickinson et al., 2015; Frøkjær-Jensen et al., 2012, 2008).

Figure 2:

Generation of high diversity donor library and TARDIS arrays

Transgenes or DNA sequences can be cloned into plasmid vectors for injections in C. elegans. However, the cloning process is laborious, and the plasmid vector is unnecessary for integration into an array or the genome. We sought to provide a protocol for library generation that maximized diversity and eliminated the requirement of cloning (Figure 2B). Oligo libraries have been used for barcoding (Levy et al., 2015) and for identification of promoter elements (de Boer et al., 2020) in yeast, but practical implementation of large synthetic libraries for transgenesis has never been performed in an animal system. We used randomized synthesized oligos to build a highly diverse library of barcodes, similar to the one described by Levy et. al. (2015), via complexing PCR. Given randomized bases present at the 11 nucleotide positions centrally located within the barcode, our base library can yield a theoretical maximum of approximately 4.2 million sequences. Our overlap PCR approach achieves high levels of diversity with minimal ‘jackpotting’ — sequences with higher representation than expected (Figure 3—figure supplement 1). With low coverage sequencing, we found almost 800,000 unique barcode sequences, providing a large pool of potential sequences that can be incorporated into TARDIS arrays. Only 472 sequences were overrepresented (counts greater than 50), accounting for approximately 6.7% of the total reads and only approximately 0.06% of the unique barcodes detected.

We injected our complexed barcodes and isolated individual TARDIS array lines, each containing a subset of the barcode library (Figure 3). Individual injected worms were singled, and we identified four arrays from three plates. Arrays 1 and 2 were identified on separate plates, and were therefore derived from independent array formation events, while array 3, profile 1 and array 3, profile 2 were both identified on the same plate. Analysis of array diversity within these lines shows, somewhat unexpectedly, that during array formation a subset of barcode sequences tended to increase in frequency (Figure 3A and B). Higher frequency barcodes in arrays tend to be independent of the jackpotted sequences of the injection mix as very few are represented in the set of high frequency barcodes from the injection mix. The high frequency barcodes also varied between arrays.

Figure 3.

We found that array formation does not seem to favor any particular barcode sequence motif (Figure 3C) and that arrays can range considerably in diversity. Array 1 had 1,319 unique barcode sequences, array 2 had 3,001 unique barcode sequences, array 3 profile 1 had 91 unique barcode sequences, and array 3 profile 2 had 204 unique barcode sequences (Figure 3—figure supplement 2). Across the four arrays, we found a total of 4,395 unique barcode sequences. When we compared the individual sequences incorporated during the three independent injections, we found little overlap. 96.5% (4395/4553) of the identified sequences were unique to one injection, 3.0% (136) were incorporated twice, and 0.5% (22) were recovered from all three injections. In contrast to the diversity between injection events, a similar comparison of the two profiles derived from a single injection for array 3 showed considerable overlap, with 68% (62/91) of the profile 1 sequences also being present in profile 2. Overall, our results suggest our complexing PCR oligo library can produce a highly diverse library and that arrays can store a large diversity of unique sequences.

The distribution of element frequency within a given array follows a clear Poisson distribution. Arrays 1 and 2 show more diversity, with barcode frequencies more similar to one another than the two profiles isolated from array 3 (Figure 3—figure supplement 2). The null assumption is that the array is formed from a simple sample of the injected barcodes in equal proportions. However, arrays have been already reported to jackpot certain sequences. For example, when Lin et. al. (2021) injected fragmented DNA, they found that larger fragments were favored in the assembly. In our case, we find some barcode sequences become jackpotted, despite being identical in size. A possible explanation is that early in formation, arrays are replicating sequences, possibly to reach a size threshold. Consistent with this hypothesis, arrays with higher barcode diversity had frequencies closer to one another, while arrays with lower diversity had wider frequency ranges.

Integration from TARDIS array to F1

Our primary motivation in developing the TARDIS method was to utilize individual sequences from the TARDIS array as integrated barcodes. To assay the integration efficiency, we performed TARDIS integration on two biological replicates from a TARDIS array line (PX786) synchronized in the presence of G-418. Out of the 100 L1’s per plate initially plated on antibiotic free plates, an average of 41 worms (N=255 plates) for replicate one, and 62 worms for replicate two (N=125 plates), survived to the next day. These surviving individuals contained the array, allowing them to survive early life G-418 exposure, and generally showed fluorescent co-marker expression as well. Following heat shock to induce Cas9, replicate one produced 104 plates with hygromycin resistant individuals, indicating barcode integration, and replicate two produced 71. These results suggest that approximately 200-300 worms need to be heat shocked to obtain an integrated line when using 150bp homology arms and relatively small inserts such as the barcodes. To assay the integration frequency from the array to the F1, we performed TARDIS integration on four biological replicates derived from PX786. We found that frequency of integration for barcodes in F1 individuals was strongly correlated with the barcodes’ frequency in the TLA (Figure 4A), (R ≈ 0.96, p ≈ 5.7×10⁻¹⁵⁴). Notably, there are two replicated outliers across the four biological replicates. One barcode (TTAAATTATCACATG), tended to integrate more often than would be predicted by its frequency in the array, while barcode (GCTCATTCTGACGTA) integrated less frequently than expected (Figure 4—figure supplement 1). In general, however, we did not observe any noticeable bias in sequence motif selection following integration (Figure 4B). Several individual lineages were isolated from the population with hygromycin selection, validating functional restoration of the HygR gene, and three were randomly chosen for Sanger sequencing to confirm perfect barcode integration. As expected, these sequenced barcodes were also found amongst the barcode sequences of the array.

Figure 4:

Generation and integration of TARDIS promoter library

For testing insertion of promoter libraries via TARDIS, two separate landing pad sites utilizing split selection were engineered in chromosome II (Figure 5A). The first contained the 3’ portions of both the mScarlet-I and the HygR genes in opposite orientation to each other and separated by a previously validated synthetic Cas9 target (Stevenson et al., 2020). Similarly, the second landing pad site contained 3’ portions of mNeonGreen and Cbr-unc-119(+) separated by the same synthetic Cas9 target, allowing both sites to be targeted by the same guide. These landing pads were engineered into an unc-119(ed3) background to allow for selection via rescue of the Uncoordinated (Unc) phenotype. A strain containing only the split mScarlet-I/split HygR landing pad was also constructed, in which case a copy of Cbr-unc-119(+) was retained at the landing pad site. Repair templates contained the 5’ portion of the respective selective gene, a lox site allowing for optional removal of the selective gene after integration (by expression of Cre) and the chosen promotors in front of the 5’ portion of the respective fluorophore. The selective gene and fluorophore fragments contained >500bp overlaps with the landing pad to facilitate homology directed repair. Correct homology directed repair at both junctions resulted in worms that were fluorescent, hygromycin resistant and had wild type movement.

Figure 5.

The initial promoter library tested was composed of 13 promoters targeted to a single landing pad site with split mScarlet-I and split HygR (Table 1). These promoters ranged in size from 330-5545bp (total repair template length of 2238-7453bp). Seven different array lines were generated which exhibited distinct profiles when probed by PCR as a crude measure of array composition and diversity (Figure 5—figure supplement 1A). Promoter specific PCR showed these arrays to contain 2-13 of the 13 injected promoters, with a mean of 10.7 and a median of 12 (Figure 5—figure supplement 1B). For the selected line (PX819), 12 promoters were incorporated into the TARDIS array. From this line, approximately 200 G-418 resistant L1s (ie. those containing the array) were plated onto each of 60 plates and then heat shocked as L2/L3s to initiate integration. Hygromycin resistant individuals were recovered from 59 of the 60 plates, indicating one or more integration events on each of those plates. Four individuals were singled from each of these plates, with the intent of maximizing the diversity of fluorescent profiles and analyzed by PCR to identify the integrated promoters (Figure 5—figure supplement 1B). Based on the banding patterns, 83 of these PCR products were sequenced with nine different promoters confirmed as integrated (Table 1 and Figure 5B). This included both the smallest (aha-1p) and the largest promoter (nhr-67p) in the set. Notably, two of the three promoters that were in the array but not recovered as integrants were found to be integrated in a subsequent experiment (see below), suggesting the failure to be recovered in this case was likely due to the array composition rather than any properties of these particular promoters. For approximately half of the plates, two or more promoters were identified from the four worms chosen. Of the 83 PCR products sequenced, five had incorrect sequences and/or product sizes inconsistent with the promoter identified and three failed to prime. Additionally, several samples failed to amplify or gave a non-specific banding pattern and likely also represent incorrect integrations.

Table 1:

To test if TARDIS could be used to target multiple sites simultaneously, a second promoter library containing seven promoters targeted to each site (ahr-1p, ceh-10p, ceh-20p, ceh-40p, ceh-43p, hlh-16p, mdl-1p) was injected into worms containing both landing pad sites. Five plates of mixed stage worms were heat shocked, and worms that were both hygromycin resistant and had wild-type movement were found on three of those plates. Worms that were hygromycin resistant but retained the Unc phenotype were also observed on some plates, representing individuals with integrations at a single site. For two of the plates a single pair of integrations was observed, in both cases being ahr-1p::mScarlet plus hlh-16p::mNeonGreen. For the third plate, two different combinations were recovered: ahr-1p::mScarlet plus mdl-1p::mNeonGreen and ceh-40p::mScarlet plus ceh-10p::mNeonGreen (Figure 5C). While multi-site CRISPR is known to be possible (Arribere et al., 2014), these results suggest that TARDIS provides a unique way to engineer multiple locations using a single injection.

When transcriptional reporter lines were examined by fluorescent microscopy, expression of the fluorophores was concentrated in but not exclusive to the nucleus, consistent with the presence of nuclear localization signals (NLS) on the fluorophores. For all promoters, expression was seen in at least one previously reported tissue (Table 1) but was absent in one or more tissues for several of the promoters. Expression of single copy reporters is frequently more spatially restricted than that from integrated or extrachromosomal arrays (Aljohani et al., 2020). The differences in expression pattern may also reflect differences in the region used as the promotor or the fact that only a single developmental stage (late L4/early adult) was examined. Overall, we find that TARDIS can be used to screen functional libraries, either individually or in combination.

Discussion

Here we present the first implementation of a practical approach to large-scale library transgenesis in an animal system (Figure 1). Building on over a half century of advancements in C. elegans genetics, we can now make thousands of specific, independent genomic integrations from single microinjection events that traditionally yield at most a small handful of transgenic individuals. Increasing transgenesis throughput has long been desired, and in C. elegans several attempts have been made to multiplex transgenic protocols. Library mosSCI and RMCE, which both introduce a multiplexed injection mixture and do indeed achieve multiple integrations (Kaymak et al., 2016; Nonet, 2020). However, just as in the case of standard mosSCI or single donor injections for RMCE, anti-array screening, genotyping, and the direct integration of the process limit the multiplex potential substantially. One group has adopted arrays with small pools of guides coupled with heatshock inducible Cas9 to produce randomized mutations at targeted locations (Froehlich et al., 2021). This protocol shares similarities with TARDIS, in that diverse arrays are coupled with inducible Cas9. However, the focus of that technology was to produce randomized genomic edits, and it does not produce precise, library integrations into the genome. Recently, another group (Mouridi et al., 2022) built on the utility of heatshock Cas9 and integrated three individual sequences from an array. While these prior multiplexed methods made substantial contributions in improving the efficiency of specific transgenesis, none have yet demonstrated multiplexing beyond tens of unique sequences—orders of magnitude below what would be needed for exploratory transgenesis. TARDIS therefore provides the first true library-based approach for multiplexing transgenesis in C. elegans.

TARDIS as a method for creating barcoded individuals

Genetic barcode libraries have been applied to many high-throughput investigations to reduce sequencing costs and achieve a higher resolution within complex pools of individuals. By focusing the sequencing reads on a small section of the genome, a larger number of individual variants can be identified or experimentally followed. This critical advancement has led to the widespread use of barcoding for evolutionary lineage tracking in microbial systems (Blundell and Levy, 2014; Kasimatis et al., 2021; Levy et al., 2015; Levy, 2016; Nguyen Ba et al., 2019; Venkataram et al., 2016)–uncovering the fitness effects of thousands of individual lineages without requiring large coverage depth of the whole genome. In addition to this application, using barcoded individuals can be used to facilitate any application that involves screening a large pool of diverse individuals within a shared environment. For example, barcodes have been used in microbial studies investigating pharmaceutical efficacy (Smith et al., 2011) and barcoded variant screening (Emanuel et al., 2017). The TARDIS-based system presented here provides an approximately 1,000X fold increase in barcoding throughput in C. elegans, making it a unique resource among multicellular models that allows the large diversity pool and design logic of microbial systems to be adapted to animal models.

While we designed our barcode sequence units for the purpose of barcoding individuals, this approach could also prove useful in future optimization and functional understanding of array-based processes. In particular, the high sequence diversity but identical physical design of the synthetic barcode library may provide a unique window into extrachromosomal array biology that would be helpful in optimizing sequence units for incorporation into heritable TLAs. For example, an unexpected result of the barcoding experiment was the discovery that a small minority of sequences were overrepresented, or ‘jackpotted,’ in the TLA relative to their frequency in the injection mix (Figure 3 and Figure 3—figure supplement 1). Our expectation was that arrays would form in an equal molar fashion proportional to the injection mix based on the model that arrays are formed by physical ligation of the injected DNA fragments (Mello et al., 1991). Deviations from random array incorporation have been observed before, and a bias for incorporating larger fragments has been proposed as an explanatory mechanism (Lin et al., 2021). Our results suggest that the ultimate array composition is not directly proportional to the molarity of the injected fragments, or strictly weighted towards the size of the fragment as has been suggested. In contrast, we propose that array size affects the maintenance of extrachromosomal arrays. As such, selection can act to increase the rate of recovery for arrays that have increased their size through random amplification of some sequences by an unknown process early in the formation of the array or by expansion of similar sequences by DNA polymerase slippage during replication, as has been well documented for native chromosomes (Levinson and Gutman A., 1987). These hypotheses would be consistent with observations of Lin et. al. (2021), if the underlying mechanism for their observation is that inclusion of larger fragments tends to be positively correlated with ultimate array size, and therefore likelihood of maintenance.

TARDIS as a method for the introduction of promoters and other large constructs

While the barcode approach demonstrates the potential for using TARDIS to integrate large numbers of 433bp PCR products, previous work using CRISPR/Cas9 initiated homology directed repair has suggested that integration efficiencies decrease with the size of the insert (Dickinson and Goldstein, 2016). We therefore implemented TARDIS for integrating promoters cloned into a vector backbone and ranging in size from 330bp to 5.5kb, to determine TARDIS functionality under a physically different use case directed specifically at functional analysis. We found that promoter libraries could be integrated into either single sites or two sites simultaneously. Unsurprisingly, the frequency at which various promoters were recovered varied from array to array (for example ahr-1p was never recovered in the single site integration experiment, despite being present in the array, while it was the most common promoter recovered in the two-site integration experiment) and likely reflects the same relationship between integration frequency and prevalence in the array, as was seen with the distribution of insert abundance for the barcodes. While we showed that plasmid donors can be used in the TARDIS pipeline, neither of our two arrays contained all 13 plasmids. Given that the estimated 1-13MB size of arrays (Carlton et al., 2022) would be adequate to hold copies of each of the plasmids, as well as the extreme diversity obtained when using smaller DNA fragments, differential presence of a given promotor fragment was somewhat unexpected. This may reflect a preferential use of linear fragments in the in-situ assembly of arrays. Future use of linear fragments where feasible may increase incorporation and overall diversity (Priyadarshini et al., 2022).

For both the one and two site promoter library integrations, transgenic individuals were readily detected, suggesting the TARDIS method for integration was highly efficient. It has long been understood that successful CRISPR editing at one site significantly increases the chances of successful editing at a second site. This is the premise behind commonly used co-conversion screening strategies (also referred to as co-CRISPR), such as the dpy-10 screen commonly used in C. elegans (Arribere et al., 2014; Ward, 2015). Here we show that same type of co-conversion also occurs when using only “large” (>1kb), plasmid-based repair templates containing gene-sized repair constructs. Additionally, we have simultaneously targeted the same two landing pads presented here using standard CRISPR techniques and find that approximately half of hygromycin resistant individuals also have rescue of the Unc phenotype (i.e. editing has occurred at both sites; data not shown). Given the high rate of co-conversion, this work demonstrates multiplex integrations are possible not only by targeting multiple repair templates to a single site but also by simultaneously utilizing multiple insertion sites.

In order to recover individual edits most efficiently, given the high frequency of integration using TARDIS, we recommend to either heat shock small cohorts of array bearing individuals, such that most cohorts only yield one edited individual or to screen multiple individuals per cohort. Additionally, while split-selection methods allow for direct verification of integration, depending on the downstream use case, integrations should be confirmed by sequencing as errors can still occur, including internal deletions within the insert.

Expansion of TARDIS to other multicellular systems

Unlocking the investigative potential of transgenesis in animal systems would enable exploratory experiments normally restricted to single-cell models. For example, alanine scanning libraries and protein-protein interactions (Cunningham and Wells, 1989; Matthews, 1996; Wells, 1991), CRISPR library screening (Bock et al., 2022), and promoter library generation (Delvigne et al., 2015; Zaslaver et al., 2006). While we demonstrate the use of TARDIS in C. elegans here, the intellectual underpinnings of the approach are agnostic to the research model used. Conceptually, TARDIS facilitates high-throughput transgenesis by using two engineered components: a heritable TARDIS Library containing multiplexed transgene-units and a genomic split selection landing pad that facilitates integration of single sequence units from the library. To generate the first TARDIS libraries, we capitalized on the endogenous capacity of C. elegans to assemble experimentally provided DNA into heritable extrachromosomal arrays. Extrachromosomal arrays are formed from exogenous DNA, are megabases in size (Lin et al., 2021; Woglar et al., 2020), do not require specific sequences to form and replicate, and can be maintained in a heritable manner via selection (Mello et al., 1991). These qualities make them suitable for use as a heritable library upon which TARDIS can be based. To adopt TLAs in systems beyond C. elegans, methods must be adopted to introduce large heritable libraries into the germline, as most systems do not maintain extrachromosomal arrays. In mice, the locus H11 has been used for large transgenic insertions (Liu et al., 2022), while in Drosophila, the use of PhiC31-mediated transgenesis coupled with bacterial artificial chromosomes (BACs) have allowed for many approximately 10kb+ sized fragments to be integrated into their respective genomes (Venken et al., 2006). Each of these large integration strategies can provide a vehicle for stable inheritance of a TLA.

The second component of the TARDIS integration system is a pre-integrated landing pad sequence. We have generally favored split selectable landing pads (SSLPs) that use HygR for its effectiveness (Mouridi et al., 2022; Stevenson et al., 2020, 2021). The SSLPs are engineered to accept experiment-specific units from the array. For example, here we used SSLPs designed to accept barcodes for experimental lineage tracking and promoters for generation of transcriptional reporters. To translate TARDIS to other systems, a genomic site needs to be engineered to act as a landing pad that can utilize sequence units from the TLA and can be customized to the specific system and use. Because TLAs allow the experimenter to design the library of interest and the landing pad to recapitulate the strengths of single-cell systems, adoption of TARDIS in multicellular animal experiments can leverage the high-resolution, high-diversity exploratory space of DNA synthesis. In addition to adapting assays currently restricted to single-cell models, TARDIS also opens the door to animal-specific uses, such as developmental biology, neurobiology, endocrinology, and cancer research.

In developmental genetics, the lack of large-library transgenesis has resulted in ‘barcode’ libraries in a different form, utilizing randomized CRISPR-induced mutations to form a unique indel. For example, GESTALT (McKenna et al., 2016) creates a diversity of barcodes in-vivo via random indel formation at a synthetic target location. LINNAEUS (Spanjaard et al., 2018) similarly utilizes randomized targeting of multiple RFP transgenes to create indels, allowing for cells to be barcoded for single cell sequencing. TARDIS barcodes do not rely on randomized indel generation and thus can be much simpler to implement with sequencing approaches outlined above.

In-vivo cancer models have also adopted the high-resolution, high-variant detection of barcodes for the study of tumor growth and evolution. Rogers at al., developed Tuba-seq (Rogers et al., 2017; Winslow, 2022), a pipeline that takes advantage of small barcodes allowing for in-vivo quantification of tumor size. In Tuba-seq, barcodes are introduced via lentiviral infection, leading to the barcoding of individual tumors. TARDIS brings the multiplexed library into the animal context without requiring viral vectors or intermediates, thereby allowing large in-vivo library utilization and maintenance. Capitalizing on the large sequence diversity possible within synthesized DNA libraries with a novel application in multicellular systems generates new opportunities for experimental investigation in animal systems heretofore only possible within microbial models.

Summary

In summary, here we have presented Transgenic Arrays Resulting in Diversity of Integrated Sequences (TARDIS), a simple yet powerful approach to transgenesis that overcomes the limitations of multicellular systems. TARDIS uses synthesized sequence libraries and inducible extraction and integration of individual sequences from these heritable libraries into engineered genomic sites to increase transgenesis throughput up to 1000-fold. While we demonstrate the utility of TARDIS using C. elegans, the process is adaptable to any system where experimentally generated genomic loci landing pads and diverse, heritable DNA elements can be generated.

Materials and Methods

Table 2:

General TARDIS reagents

Strains generated for this publication along with key plasmids and reagents are listed in the Key Resources Table. A full list of all plasmids is given in Supplementary file 1. All plasmids were cloned by Gibson Assembly following the standard NEB Builder HiFi DNA Assembly master mix protocol [New England Bio Labs (NEB), Massachusetts, USA], unless otherwise indicated. All plasmids have been confirmed by restriction digest, Sanger sequencing, and/or full plasmid sequencing. All primers used in the construction and validation of plasmids are listed in Supplementary file 2.

To generate our heatshock inducible Cas9, hsp16.41p::Cas9dpiRNA::tbb-2 ‘3UTR, the hsp16.41 promoter was amplified from pMA122 (Addgene ID34873) (Frøkjær-Jensen et al., 2012). The germline licensed Cas9 and tbb-2 3’ UTR were amplified from pCFJ150-Cas9 (dpiRNA) (Addgene ID107940) (Zhang et al., 2018). All fragments were assembled into PCR linearized pUC19 vector (NEB) to give the final plasmid pZCS36.

To generate a standard empty guide vector, U6p::(empty)gRNA, the U6p and gRNA scaffold from pDD162 (Addgene ID47549) (Dickinson et al., 2015) was amplified and assembled into PCR linearized pUC19 to generate pZCS11.

To generate rsp-27p::NeoR::unc-54 3’ UTR, the full resistance cassette was amplified from pCFJ910 (Addgene ID44481) and assembled into PCR linearized pUC19 vector to give pZCS38.

Genomic DNA isolation for array and integrant characterization

For processing large populations of worms, a widely used bulk lysis protocol was adapted (Fire Lab 1997 Vector Supplement, February 1997). In brief, 450µl of worm lysis buffer (0.1M Tris-Cl pH8.0, 0.1M NaCl, 50mM EDTA pH8.0, and 1% SDS) and 20µl 20mg/ml proteinase K were added to approximately 50µl of concentrated worm pellet. Samples were inverted several times to mix and incubated at 62C° for 2 hours. After incubation, samples were checked under the microscope to ensure no visible worm bodies were left in the solution. Chip DNA binding buffer (Zymo, California, USA) was added in a 2:1 ratio and gently inverted to mix. Samples were then purified with Zymo-Spin IIC-XLR columns following manufacture protocol. Samples were eluted in 50µl of water. Each sample was then digested with 10mg/ml RNase A (ThermoFisher Scientific Massachussets, USA, Cat. No. EN0531) at 42C° for 2 hours. Genomic DNA was then reisolated by adding a 2:1 ratio of Chip DNA binding buffer and purifying with Zymo-Spin IIC-XLR columns. Final genomic samples were quantified by Nanodrop.

For individual worm lysis, individual array bearing worms were isolated and lysed in 4µl of EB (Zymo, Cat. No.: D3004-4-16) buffer with 1mg/ml proteinase K (NEB). Each sample was rapidly frozen in liquid nitrogen and then thawed to disrupt the cuticle and then incubated at 58C° for 1 hour, with a subsequent incubation at 95C° for 20 minutes to inactivate the proteinase K.

TARDIS integration-general protocol

On Day 0, TARDIS array bearing C. elegans grown to a high density of gravid adults were hypochlorite synchronized in NGM buffer (Leung et al., 2011) and grown overnight in 15ml NGM with G-418 (1.56mg/ml) at 15C° with nutation. On Day 1, L1s were washed three times with NGM buffer to remove G-418, plated onto media without selective agent and continued to be grown at 15°C. On Day 2, L2/L3s were heat-shocked at 35.5°C for one hour. After heat shock, worms were grown at 25°C until gravid adults when Hygromycin B was top spread on plates at a final concentration of 250µg/ml.

Construction of landing pad for barcodes

To create the barcode landing pad, an intermediate Chr. II insertion vector, pZCS30 was built from pMS4 by using PCR to remove the let-858 terminator. pZCS30 served as the vector backbone for pZCS32. To assist in cloning, the backbone was split into two PCR fragments. The broken HygR gene was amplified in two parts, rsp-0p::5’ΔHygR and 3’ΔHygR::unc-54 3’ UTR, from pCFJ1663 (Addgene ID51484). Overlapping PCR was used to fuse both HygR fragments. The resulting broken HygR cassette removed the intron found in pCFJ1663 as well as four codons from exon one and three codons from exon two, while also creating +1 frameshift and a reverse orientation guide RNA target for pZCS41. A second overlapping PCR was performed to fuse the broken HygR cassette to backbone fragment two. The resulting two-part clone was then assembled to give pZCS32.

The barcode landing pad TARDIS strain, PX740 was created by injecting a mixture of 10ng/µl pZCS32, 50ng/µl pMS8, and 3ng/µl pZCS16 (Addgene ID154824) (Stevenson et al., 2020) into the gonad of young adult N2-PD1073 (Teterina et al., 2022) hermaphrodites. Screening and removal of the SEC were performed following (Dickinson et al., 2015). Presence of the correct insertion was confirmed by Sanger sequencing using the primers listed in Supplementary file 3.

To create the barcode landing pad targeting guide RNA, U6p:: GCGAAGTGACGGTAGACCGT, the guide sequence GCGAAGTGACGGTAGACCGT was added by overlapping primers to the vector pZCS11 to give the final construct pZCS41.

Design and construction of barcode donor library

Oligo ZCS422 was ordered with 11 randomized N’s (hand mixed bases) [Integrated DNA Technologies (IDT), Iowa, USA] and has the following sequence: CTACACGACGCTCTTCCGATCTNNNCNNTNTNANNNNAGATCG GAAGAGCACACGTCTG. Four ‘hard-coded’ base pairs were included within the randomized sequence. ZCS422 was used as the core for the generation of two separate complexing PCR barcode homologies referred to as “barcode-15X” and “barcode-20X” to denote the number of complexing cycles (Figure 2). All PCRs were performed using the high-fidelity Q5 polymerase (NEB) as per manufacture instructions. All primers used for barcode synthesis can be found in Supplementary file 4. For both “barcode-15X” and “barcode-20X, the left and right homology arms were generated separately by PCR and purified by gel extraction. An initial 10 cycle PCR was performed to convert the oligo into a 201bp double stranded product which was gel extracted with Zymo clean Gel DNA Recovery Kit (Cat. No.: D4008) following manufacture protocol. The low cycle number was done to retain diversity and to minimize effects of PCR jackpotting.

For “barcode-15X”, to generate the complete donor homology, the double stranded barcode template was combined with both the left and right homology arms for a three-fragment overlap PCR. To maximize diversity, high concentrations of the individual templates were used. The reaction contained 52 fmol/µl of barcode template and 22 fmol/µl of left right arms in a single 50µL Q5 reaction. A total of 15 cycles were performed. The lower cycle was again done to reduce PCR jackpotting. The single product was gel extracted as a 433bp fragment. The final donor fragment is referred to as ‘barcode-15X.’

To generate “barcode-20X” a similar three-fragment overlap PCR was used. 4.3fmol/µl of barcode template, 15.33fmol/µl of left arm, and 3.3fmols/µl of right arm were combined across six Q5 50ul reactions and a total of 20 cycles were performed. The right arm concentration was lower caused by low concentration extraction. The single product was gel extracted as a 433bp fragment. The final donor fragment is referred to as ‘barcode-20X.’

Generation of barcode TLA lines

The TARDIS array bearing line PX786 was created by injecting 50ng/µl of barcode-15X, 10ng/µl pZCS38, 15ng/µl pZCS41, 5ng/µl pZCS16, and 20ng/µl pZCS36 into young adult PX740 hermaphrodites. Individual injected worms were grown at 15C° for four days and then treated with G-418 (1.56mg /ml). A single stable array line was isolated and designated PX786.

The TARDIS array bearing lines PX816, PX817, PX818 profile 1 and PX818 profile 2 were created by injecting 100ng/µl of barcode-20X, 10ng/µl pZCS38, 15ng/µl pZCS41 and 20ng/µl pZCS36. Individual injections were grown at 15°C for four days and then treated with G-418 (1.56mg/ml). Full genotypes are provided in Supplementary file 7 as the full genotypes cannot be contained within a table.

Estimation of barcode integration frequency population sample preparation

PX786 was grown to gravid adults in the presence of G-418 with concentrated NA22 transformed with pUC19 for ampicillin resistance as a food source (designated PXKR1). Once gravid, the strain was hypochlorite synchronized and grown overnight in 15ml NGM buffer with G-418 at 15°C with nutation. For each of the four replicates, a synchronized L1 population was divided in half. The first half was pelleted by centrifugation (2,400xg for two minutes) and frozen (−20°C) until processed. These samples represented the array-bearing samples. Another sample of approximately 150,000 L1s was plated to large NGM and subjected to the standard TARDIS heat shock and grown until the population was primarily gravid adults. Then, this population was hypochlorite synchronized and grown in NGM buffer at 15°C with Hygromycin B (250 µg/ml). These entire samples were pelleted and frozen, representing the F1 samples.

PCR for barcode quantification

Several different PCRs were performed depending on the intended downstream sequencing quantification. See Figure 2-figure supplement 1 for a schematic layout of the different PCR steps. The primers used for barcode quantification are given in Supplementary file 5. To quantify the diversity of arrays from either a bulk population or individual worms, two separate PCRs were performed to quantify the diversity of arrays.

The first PCR (Amplicon one-array) was performed for three cycles to add Unique Molecular Identifiers (UMI), allowing for downstream de-duplication. For each sample either 100ng of genomic DNA (bulk samples) or the entirety of the worm lysate (single worms) was used as the template. PCR samples were then purified using the Zymo DNA Clean and Concentrator-5 Kit (Cat. No.: D4004) following manufacture protocol and eluted with 24µl water. Samples were not quantified prior to the next step as most DNA will not be from the target PCR product. A second PCR (Amplicon two) using the entire 24µl of the extract from the previous step was performed for 24 cycles to added indices. In some cases, a smaller, non-specific product was also formed, so each sample was run on a 2% agarose gel and extracted for the 169bp size product.

Two separate PCRs were performed to quantify the diversity of integrated barcode sequences. The first PCR (Amplicon one-integrant) was performed for three cycles to add UMI sequences. For each sample, 100ng of genomic DNA was used as the template. PCR products were then purified as described above and followed the Amplicon two protocol. Each product was quantified on a Synergy H1 plate reader using software Gen 5 3.11. Samples were mixed at an equal molar ratio for a 20nM final concentration for Illumina Sequencing.

Illumina sequencing and data processing for barcode characterization

To quantify the diversity of barcodes in each sample, PCR products were sequenced on either a single NextSeq 500 lane or NovaSeq SP, with single read protocols performed by the Genomics and Cell Characterization Facility (GC3F) at the University of Oregon. Compressed fastq files were processed with cutadept 4.1 (Martin, 2011) to remove low quality reads (quality score < 30, max expected error=1, presence of ‘N’ within the read) and trimmed to 87bp. For the NextSeq lane the specific nextseq trim=30 command was used. The sequences were then demultiplexed using cutadept. For duplicate removal, AmpUMI (Clement et al., 2018) in “processing mode” was used with umi regex "CACIIIIIIIIIIGAC" for individual index files. Deduplicated reads were then trimmed to 15 base pairs with cutadapt for each file. Starcode (Zorita et al., 2015) was then used for mutation correction and counting of each barcode sequence. Each unique sequence was only kept if its final length was 15 base pairs. For the injection mix, each unique barcode was kept regardless of total reads. For all TARDIS arrays and F1 integrations, we used the observed plateau in the number of observed unique barcodes for various count cutoffs to establish a conservative threshold of five or more reads for true barcode sequence (Figure 3—figure supplement 3). Visualizations were created with Python 3.7.13 (Guido van Rossum, 1991) and matplotlib 3.5.2 (Hunter, 2007). Sequence logos were created with Logomaker (Tareen and Kinney, 2020). Correlation and p-values generated by scipy input stats.pearsonr (Virtanen et al., 2020). This statistical test was chosen because the relationship from array to integration is approximately linear. All data were processed in Jupyter Notebooks (Kluyver et al., 2016) utilizing Google Colaboratory (colab.research.google.com). All python code is available on Figshare.

Design of landing pads for transcriptional reporters

The utilized fluorophores, mScarlet-I (Bindels et al., 2017) and mNeonGreen (Shaner et al., 2013) were synthesized with the desired modifications as genes incorporated into the pUCIDT-KAN plasmid (IDT). First, a SV40 nuclear localization sequence (NLS) was added after the 13^th codon of the mScarlet-I gene. This same 66bp sequence was also used in place of the first four codons of the mNeonGreen gene. Secondly, a PEST domain (Li et al., 1998) flanked by MluI restriction endonuclease sites and an additional NLS from the egl-13 gene (Lyssenko et al., 2007) were added to the 3’ end of the gene. The C. elegans Codon Adapter (https://worm.mpi-cbg.de/codons/cgi-bin/optimize.py) (Redemann et al., 2011) was used to codon optimize both modified fluorophore sequences and to identify locations for three synthetic introns. The first two introns contained 10-base pair periodic A_n/T_n-clusters (PATCs), which have been shown to reduce rates of transgene silencing (Frøkjær-Jensen et al., 2016), while the third was a standard synthetic intron. Finally, the 3’ UTR of the tbb-2 gene, which is permissive for germline expression (Merritt et al., 2008), was added to the end of fluorophore genes. The modified mScarlet-I and mNeonGreen genes were PCR amplified and assembled into NotI and SnaBI linearized pDSP1, a standard backbone vector derived from pUCIDT-KAN. The resulting mScarlet-I-containing plasmid was designated pDSP6 and the mNeonGreen containing plasmid was designated pDSP7. In addition, pDSP9, a version of mScarlet-I lacking the PEST destabilization sequence was generated by PCR amplifying the shared egl-13 NLS and tbb-2 3’ UTR sequence from pDSP6 and then assembling this fragment into MluI and SnaBI linearized pDSP6.

Landing pads were built using a modification of our previous split landing pad strategy (Stevenson et al., 2020). Each landing pad contained the 3’ portion of a selectable marker followed by a validated guide sequence and the 3’ portion of a fluorophore. The guide sequence (GGACAGTCCTGCCGAGGTGGAGG) has no homology in the C. elegans genome and has been previously shown to allow for efficient editing (Stevenson et al., 2020). This sequence was targeted by the plasmid pMS84 which was made from pZCS2, a plasmid made in the same manner as pZCS11 but which is missing a segment of the plasmid backbone, using the Q5 site-directed mutagenesis kit (NEB). mScarlet-I was paired with a HygR marker (Dickinson et al., 2013) while mNeonGreen gene was paired with the Cbr-unc-119(+) rescue cassette (Frøkjær-Jensen et al., 2008).

Construction of split HygR /mScarlet-I landing pads

The split HygR/mScarlet-I landing pad was inserted into the well-characterized ttTi5605 Mos1 site on Chromosome II (Frokjaer-Jensen et al., 2008). pQL222 (a gift from Dr. QueeLim Ch’ng), a modified version of the pCFJ350 (Frøkjær-Jensen et al., 2012) in which the original resistance marker was changed to a kanamycin and zeocin cassette, was digested with BsrGI to provide a linear vector backbone. The Cbr-unc-119 gene, with a lox2272 sequence added to the 5’ end, and a multiple cloning site (MCS) with a lox2272 site added to the 3’ end were PCR amplified from pQL222. These two fragments were assembled into the linearized backbone to yield pDSP2.

Next, the 3’ 949 bases of the HygR marker were amplified along with the unc-54 3’UTR from pDD282 (Dickinson et al., 2015). The primers used were designed to invert the loxP sequence at the 3’ end of unc-54 3’UTR from its original orientation in pDD282 and to add the guide sequence to the 5’ end of the HygR fragment. The 3’ 821 bases of the mScarlet-I gene along with the tbb-2 3’ UTR were amplified from pDSP6. These these two amplicons were assembled into a SbfI/SnaBI digested pDSP2 vector to yield pDSP61. Similarly, the mScarlet-I gene was amplified from pDSP9 and assembled into pDSP2 along with the HygR fragment to give pDSP62, a PEST-less version of the landing pad construct. Both the PEST-containing and PEST-less versions of the split HygR/mScarlet-I landing pads were integrated into QL74, a 6x outcross of EG4322 (Frøkjær-Jensen et al., 2008), using the standard MosSCI technique (Frøkjær-Jensen et al., 2012) to yield strains GT331 and GT332.

Construction of Split Cbr-unc-119(+)/mNeonGreen landing pad

To construct the Cbr-unc-119(+)/mNeonGreen landing pad, we wanted to find a genomic safe harbor site permissive to germline expression of transgenes. The oxTi179 universal MosSCI site on Chromosome II permits germline expression but interrupts arrd-5, an endogenous C. elegans gene. Therefore, CRISPR-mediated genome editing was used to place the landing pad between ZK938.12 and ZK938.3, two genes adjacent to arrd-5 whose 3’ UTRs face each other. The genomic sequence CATGGTATAAAGTGAATCAAGG was targeted by the plasmid pDSP45 which was made from pDD162 (Dickinson et al., 2013) using the Q5 site-directed mutagenesis kit (NEB).

Chromosomal regions II:9830799-9831548 and II:9831573-9832322 were amplified from genomic DNA for use as homology arms. The self-excising cassette (SEC) was PCR amplified from pDD282 such that the loxP sites were replaced by lox2272 sites. A MCS was amplified from pDSP2 while a linear vector backbone fragment was amplified from pDSP1. All five of these PCR fragments were assembled into a circular plasmid, which was immediately used as a template for seven synonymous single-nucleotide substitutions into the terminal 21bp of the ZK938.12 gene fragment by Q5 site-directed mutagenesis kit (NEB). The resultant plasmid was named pDSP47.

The 3’ 846 based of the Cbr-unc-119(+) rescue cassette plus the 3’ UTR were amplified from pDSP2 such that the lox2272 sequence after the 3’ UTR was replaced with a loxN site and the guide site GGACAGTCCTGCCGAGGTGGAGG was added upstream of the coding sequence. The 3’ 818 bases of mNeonGreen plus the tbb-2 3’ UTR were amplified from pDSP7. These two amplicons were assembled into StuI/AvrII digested pDSP47 to yield pDSP63.

Following the protocol from Dickinson et al. (2015), the landing pad from pDSP63 was integrated into the GT331 strain using pDSP45 as the guide plasmid. Upon integration, this yielded strain GT336. Activation of the Cre recombinase within the SEC by heat shock caused both the removal of the SEC from the mNeonGreen landing pad and the Cbr-unc-119(+) cassette from the mScarlet-I landing pad. The combined effect of this double excision event was to yield strain GT337 which has an Unc phenotype and no longer has the hygromycin resistance and Rol phenotypes.

Design and construction of promoter library

Targeting vectors were constructed to provide the 5’ portions of each split gene pairing. Both targeting vectors had the same multiple cloning site, allowing promoter amplicons to be assembled into either vector using the same set of primers. In addition, each selectable marker gene is flanked by a lox site that matches the sequence and orientation of the lox site flanking the 3’ portion of the marker in the genomic landing pad, allowing for the optional post-integration removal of the selectable marker gene using Cre recombinase.

To construct the split HygR/mScarlet-I targeting vector, the rps-0 promoter plus the 5’ 627 bases of the HygR gene were amplified from pDD282 such that a loxP site was added in front of the promoter sequence The MCS was amplified from pDSP2 and the 5’ 803 bases of the mScarlet-I gene were amplified from pDSP6. All three of these amplicons were assembled into NotI/SnaBI digested pDSP1 to yield pDSP15.

To construct the split Cbr-unc-19(+)/mNeonGreen targeting vector, the promoter and the 5’ 515 bases of the Cbr-unc-19(+) were amplified from pDSP2 such that a loxN site was added prior to the promoter. The MCS was amplified from pDSP2 and the 5’ 830 bases of the mNeonGreen gene were amplified from pDSP7. All three of these amplicons were assembled into NotI/SnaBI digested pDSP1 to yield pDSP16.

The entire intergenic region was used for aha-1p, ahr-1p, ceh-20p, ceh-40p, egl-46p, hlh-16p and nhr-67p. For ceh-43p the 2096bp upstream of the ceh-43 start codon was used. For mdl-1p, egl-43p and ceh-10p, the promoters describe in (Reece-Hoyes et al., 2013) were used. For daf-7p and lin-11p the promoters described in (Entchev et al., 2015) and (Marri and Gupta, 2009) respectively were used. Promoters were amplified from N2 genomic DNA using primers designed to add the appropriate homology to the targeting vector and assembled into PCR linearized pDSP15 or pDSP16 for split HygR/mScarlet-I and split Cbr-unc-19(+)/mNeonGreen respectively.

Insertion of promoter libraries by TARDIS

For integration of a promoter library into a single landing pad site, a mixture consisting of 15ng/μl guide plasmid (pMS84), 20ng/µl hsp16.41::Cas9 plasmid (pZCS36), 10ng/µl neomycin resistance plasmid (pZCS38) and 0.45fmol/µl of each of the 13 repair template plasmids (Table 1) was microinjected into the gonad arms of young adult GT332 hermaphrodites. Individuals were incubated at 20°C and after three days treated with 1.56mg/ml G-418 to select for array bearing individuals. Once stable array lines were obtained, integration was done using the standard TARDIS protocol, using a density of approximately 200 L1s per plate.

For integration of a promoter library into two landing pad site, a mixture consisting of 15ng/μl guide plasmid (pMS84), 20ng/µl hsp16.41::Cas9 plasmid (pZCS36), 0.5ng/µl neomycin resistance plasmid (pZCS38) and 0.45fmol/µl of each of the 14 repair template plasmids (seven targeted to each site) was microinjected into the gonad arms of young adult GT337 hermaphrodites. Individuals were incubated at 20°C and after three days treated with 1.56mg/ml G-418 to select for array bearing individuals. Once a stable array line was obtained, plates of mixed stage worms were transferred to plates without drug, heat shocked at 35.5°C for 1.5hrs and returned to 20°C. Three days after heat shock, hygromycin was added at a final concentration of 250µg/ml.

For both scenarios, candidate worms (those which had both hygromycin resistance and wild-type movement) were singled and screened by PCR. The identity of the integrated promoters was determined by Sanger sequencing of the PCR product. Primers used for genotyping are given in Supplementary file 6.

Microscopy

Individual late L4/young adults were mounted on 2% agarose pads and immobilized with 0.5M levamisole. Imaging was performed on a DeltaVision Ultra microscope (Cytiva, Massachusetts, USA) using the 20x objective and Acquire Ultra software version 1.2.1. Fluorescent images were acquired using the orange (542/32nm) and green (525/48nm) filter sets for mScarlet-I and mNeonGreen respectively. Light images were captured at 5% transmission and a 0.01 second exposure. Fluorescent images were captured at 5% transmission and a 2sec (aha-1p), 1sec (ceh-40p, ceh-43p, nhr-67p, ceh-10p::mNeonGreen), 0.5sec (ceh-10p::mScarlet-I, ceh-20p, daf-7p) or 0.2sec (lin-11p, mdl-1p) exposure. Images were processed in Fiji (ImageJ) version 2.9.0/1.53t.

Accessibility of reagents, data, code, and protocols

The authors affirm that all data necessary for confirming the conclusions of the article are present within the article, figures, and tables. Plasmids pDSP15 (Addgene ID 193853), pDSP16 (Addgene ID193854), pMS84 (Addgene ID 193852), pZCS36 (Addgene ID 193048), pZCS38 (Addgene ID193049), and pZCS41 (Addgene ID 193050), are available through Addgene and can be freely viewed and edited in ApE (Davis and Jorgensen, 2022) and other compatible programs. Strains PX740, GT332 and GT337 are available from the Caenorhabditis Genetics Center (cgc.umn.edu). Strains and plasmids not available at a public repository are available upon request. Illumina sequencing data are available at BioProject ID: PRJNA893002. All other data, code, plasmid and landing sequences and original microscopy images are available on Figshare (Stevenson et al., 2022). We plan to continue to develop TARDIS technology and provided descriptions of updated libraries and advancements at: https://github.com/phillips-lab/TARDIS.

Acknowledgements

We thank the Phillips lab members for helpful suggestions and technical assistance. In particular, we thank Erin Jahahn for her assistance in early TARDIS multiple integrations, Zach Muñoz for his assistance injecting several TARDIS libraries, Kristin Robinson for creating PXKR1, and Ellie Laufer for her assistance in genotyping individual promoter integrations. We also thank Sihoon Moon, Hyun Jee Lee, and Eric Andersen for technical assistance in plasmid construction.

Funding

This work was funded by National Institutes of Health grants R35GM131838 awarded to PCP and R01AG056436 awarded to PCP and HL.

Conflict of Interest

The presented technology underlies U.S. patent application 17/236,556 and associated U.S. Provisional Application No. 63/013,365 (Inventors ZCS, SAB, PCP, assignee University of Oregon). The patent applicant/assignee and grant funding institutions had no involvement in the described work, including but not limited to experimental design, data analysis, interpretation, or manuscript preparation.

Additional files

Supplementary file 1

A table of the plasmids used.

Supplementary file 2

A table of the primers used for cloning.

Supplementary file 3

A table of the primers used for strain confirmation by Sanger sequencing.

Supplementary file 4

A table of the primers and ultramer used to create the barcode donor homology.

Supplementary file 5

A table of the primers used for Illumina sequencing.

Supplementary file 6

A table of the primers used for promoter identification.

Supplementary file 7

A document with the complete genotypes for the barcode TARDIS arrays presented in the study.

Figure 5 – figure supplement 1 -source data 1 This file contains original gels used in creating figure 5 – figure supplement 1 parts A and C