Introduction

The endothelial cell monolayer lining the inner surface of the vascular tree forms an active semipermeable barrier that actively responds to hemodynamic forces to control blood pressure (1,2). Regulation of the endothelial barrier involves a bidirectional interplay between actomyosin cytoskeleton and plasma membrane mechanics, which together control paracellular exchanges at cell‒cell junctions (3), as well as transcellular exchanges through less-characterized transcellular openings (1,2,4). Defining how membrane mechanical parameters affect the dynamics of opening and widening of transendothelial pores will help to better define the role of these openings both physiological and pathophysiological processes.

Large transcellular pores in the endothelium can contribute to aqueous humor outflow in the eyes, can form during the diapedesis of leukocytes, or appear when endothelial cells are intoxicated by several bacterial toxins known to breach the endothelial barrier (5–7). Bacterial mono-ADP-ribosyltransferases (mART) exotoxins, which catalyze the post-translational modification of the small GTPase RhoA for inhibition, induce the spontaneous formation of TEM tunnels up to 10 to 20 µm in diameter (8–10). This group of mART includes the exotoxin C3 (ExoC3) from Clostridium botulinum, and the Epidermal Differentiation Inhibitors (EDIN) A, B, and C close homologues from Staphylococcus aureus (11–13). The intravenous injection of EDIN or ExoC3 triggers vascular leakage (8,14). Cumulative evidence also indicates that EDIN favors the translocation of S. aureus through vascular tissues for dissemination (15,16). Although TEM tunnels have not yet been visualized in vivo, they form ex vivo in the endothelium lining the inner surface of rat aortas either infected with S. aureus-producing the RhoA-targeting EDIN mART or treated with EDIN (8). Mechanistically, the inhibition of RhoA signaling by bacterial mART exotoxins disrupts contractile actomyosin stress fibers, which otherwise stiffen in response to shear forces exerted by the blood flow that tends to compress cells (8–12). In line with this, compressive mechanical forces applied to the apical region of endothelial cells bring into close contact the apical and basal plasma membranes to nucleate transcellular pores (17). Although force-induced nucleation of TEMs can be triggered in the absence of inhibition of RhoA, the magnitude of the force required to mechanically open TEMs dramatically decreases when RhoA is inhibited (17). This led to postulate that TEMs form because of a disruption of actomyosin stress fibers under the control of RhoA, which concur to reduce the height of cells as they spread out (8,18). The physical mechanisms that set both the nucleation of TEMs and their maximal width remain to be ascertained experimentally.

TEMs represent a remarkable model system to identify the molecular machinery that controls cell mechanics (9). Our current view of the mechanical forces at play in the opening of TEMs largely arises from the phenomenological analogy drawn between TEM tunnel opening and the formation of dry patches in viscous liquid forced to spread on a solid surface, a physical phenomenon referred to as liquid dewetting (19). Notably, the analogy drawn between liquid and cellular dewetting suggests that the increase of membrane tension in response to cell spreading is the driving force of TEM nucleation also contributing to define the initial speed of opening, i.e. before that membrane tension relaxation around TEM edges and build-up of an actomyosin bundle encircling TEMs counteract the opening (10,19,20). Of note, the high curvature of the plasma membrane at the edge of TEMs also points toward a contribution of membrane bending rigidity, i.e. the energy required to locally bend the membrane surface, in their dynamics. Experimental evidence is still required to ascertain roles of membrane tension and bending rigidity in the dynamics of TEM tunnel nucleation and enlargement.

Caveolae are mechano-regulators of the plasma membrane that spontaneously flatten to accommodate acute mechanical loads and thereby prevent membrane rupturing (21,22). Caveolin oligomers are essential components of caveolae pits (23,24). Caveolin-1 homo-oligomers form flat discoid complexes embedded into the inner leaflet of the membrane (24). The process of invagination of caveolar pits of 50-100 nm diameter involves the association of caveolin-1 with cavin-1 cytosolic structural protein (also referred to as PTRF) (25–29). Caveolae pits are further stabilized at their neck by the assembly of a ring of dynamin-like EHD2 oligomers (30–32). In endothelial cells, the crosstalk between caveolin-1 and RhoA during actomyosin contractility leads to critical mechano-sensing and adaptation to hemodynamic forces (33,34). For example, caveolin-1-deficient mice undergo an increase in the endothelial nitric oxide (eNOS) signaling that is critical to activate RhoA signaling via nitration-mediated inhibition of the GTPase activating protein (GAP) activity of p190RhoGAP-A (35–37). Cell biology and epidemiological studies have started to establish the importance of caveolin-1 in host‒pathogen interactions (38–40). Considering the protective function of caveolae membrane invaginations in ensuring membrane tension homeostasis in response to acute mechanical loads (21,41), caveolin-1 and cavin-1 represent potential mechano-regulators of transcellular pore dynamics.

Using cutting edge microscopy technics, we establish that endothelial cells treated with RhoA-targeting mART display caveolae pits at the ventral part of the plasma membrane and a loose F-actin meshwork that frame large cytosolic zones devoid of F-actin. We report that the disruption of caveolae and depletion of caveolin-1, using siRNA-targeting cavin-1 or caveolin-1, respectively increases the number of TEM per cell. We establish that the increase of TEM opening correlates with a decrease in cell volume concomitant with cell spreading, which concur to a decrease in cell height. Strikingly, we establish that caveolin-1, contrary to cavin-1, controls the widening of TEMs, which rules out a role of caveolae membrane-invaginations. This increase in both the number and width of TEMs correlates with a higher susceptibility of caveolin-1-deficient mice to the lethal effect of EDIN-B mART activity during S. aureus septicemia. Finally, using an independent biophysical technique and theoretical modeling, we provide compelling evidence that caveolin-1 contributes, independently of cavin-1, to increasing plasma membrane bending rigidity. These data point for a role of cavin-1/caveolin-1 components of caveolae in the regulation of TEM nucleation through the modulation of membrane tension. Hence, we ascribe to caveolin-1 a function in stiffening the plasma membrane that is independent from cavin-1-dependent caveolae, which eventually modulates TEMs opening speed and width.

Results

Caveolae control the density of TEM tunnels

Formation of large transendothelial cell macroaperture (TEM) tunnels is observed in endothelial cells intoxicated with EDIN-like factors from S. aureus, as well as with the prototypic exoenzyme C3 (ExoC3) from C. botulinum. Considering that RhoA inhibition increases endothelial cell spreading, we investigated the impact of ExoC3 treatment on the distribution and density of caveolae in the inner leaflet of the plasma membrane in human umbilical vein endothelial cells (HUVECs) (Fig. 1A-C). We used a cell unroofing approach that allows direct visualization of membrane invaginations on a platinum replica via transmission electron microscopy (42). In both naïve and ExoC3-treated cells, we observed membrane-associated cytoskeleton filaments, the honeycomb structure of clathrin lattices, clathrin-coated pits, and rough aspects of pit-like caveolar invaginations (Fig. 1A). We verified that the treatment of cells with ExoC3 had no impact on caveolin-1 and cavin-1 expression (Fig. S1A). Of note, the density of the cytoskeletal filaments was less pronounced in the ExoC3-treated cells (Fig. 1D, arrowhead). Cells were transfected with a plasmid encoding GFP-caveolin-1 to confirm by immunogold labelling the presence of caveolin-1-positive caveolae invaginations at the ventral side of the plasma membrane (Fig. 1B). We quantified the density of caveolae in ExoC3-treated and control cells. In total, we analyzed an area A_area > 175 µm² under each condition (n ≥ 16 membrane areas of independent cells per condition). We recorded a 1.6-fold decrease in the mean density of caveolae in the ExoC3-treated cells, which exhibited 3.4 ± 2.1 caveolae/µm² of membrane, as compared to 5.4 ± 3.1 caveolae/µm² of membrane in untreated cells (Fig. 1C). The pool of plasma membrane-located caveolae remaining in ExoC3-treated cells are evenly distributed with no detectable accumulation around TEM tunnels (Fig. 1B). ExoC3 treatment reduces the density of invaginated caveolae at the plasma membrane, pointing for the interest of studying the impact of caveolae depletion in TEM formation.

Figure 1.

Before functional analysis of the impact of caveolae components on TEM tunnel nucleation and growth, we analyzed the previously established stoichiometry of caveolin-1 and cavin-1 in response to siRNA treatments (43). We observed that small interfering RNA (siRNA)-mediated depletion of caveolin-1 (siCAV1) strongly reduces both caveolin-1 and the cellular pool of cavin-1/PTRF by approximately 80% (Fig. S1B). In contrast, about one half of the pool of caveolin-1 remained unaffected by the siRNA-targeted depletion of cavin-1/PTRF (siPRTF) (Fig. S1B). We concluded that siPTRF leaves a cellular pool of caveolin-1 unaffected, contrary to siCAV1. Both siRNA treatments had no effect on the extent of mono-ADPribosylation of RhoA (Fig. S1C). We next quantified the efficiency of TEM tunnel formation in different conditions of siRNA treatment. HUVECs were treated with siCTRL, siCAV1 or siPTRF prior to ExoC3 treatment. Examples of cells treated in these conditions are shown in Figure 1D and in supplementary videos 1, 2 and 3. Quantitative measurements showed a higher percentage of cells displaying at least one TEM in the population of caveolin-1 or cavin-1-deficient cells (37.6 ± 1.3% siCAV1 and 36.4 ± 1.3% siPTRF versus 28.8 ± 1.2% siCTRL) (Fig. 1E). Moreover, we observed a significant increase in the density of TEMs per cell in siCAV1 (N_{TEM_siCAV1} = 1.96) and siPTRF (N_{TEM_siPTRF} = 1.36) conditions, as compared to siCTRL (N_siCTRL = 0.91) (Fig. S2A). We verified that such an increase of TEM density per cell and within the cell population was also induced by the ExoC3-like RhoA-targeting mART EDIN from S. aureus (Fig. S2B-C) or by siRNA-targeting EHD2 caveolae-stabilizing protein, a treatment that leaves caveolin-1 and cavin-1 unaffected (Fig. S3). Together, these data show that the efficiency of formation of TEMs is inversely correlated to the density and stability of caveolae at the plasma membrane.

Caveolae buffer the decrease of cell height triggered by RhoA inhibition-driven spreading

Formation of TEMs due to the disruption of RhoA-driven F-actin polymerization and actomyosin contraction is facilitated by a reduction in cell height that promotes contact between the apical and basal membranes (17,18). We first quantified the mesh size of F-actin network using 2D stochastic optical reconstruction microscopy (STORM) that integrates F-actin signals with a ∼30-nm resolution over the whole cell thickness which can be as thin as 50 nm at the cell periphery (10). The siCTRL, siCAV1 and siPTRF-transfected HUVECs displayed a classical organization of actin cytoskeleton with actin stress fibers intertwined with a high-density meshwork of F-actin (Fig. 2A, control). When siRNA-treated cells were next intoxicated with ExoC3, we observed the disruption of actin stress fibers together with a reorganization of the actin cytoskeleton into a loosely intertwined and irregular F-actin meshwork defining large zones devoid of F-actin (Fig. 2A, ExoC3). In all conditions of siRNA treatment, we have measured that ExoC3 treatment induces a significant increase of actin-mesh size of about 0.2 μm², as compared to non-intoxicated cells (Fig. 2B). No significant difference of mesh size was recorded between siCTRL, siCAV1 or siPTRF conditions before and after treatment with ExoC3 (Fig. 2B). Indeed, we observed in cells treated with ExoC3 no specific cellular pattern or bimodal distribution of mesh size between the different siRNA conditions but a rather very heterogeneous distribution of mesh size values that could reach a few square microns in all conditions. We concluded that in addition to the well-establish impact of RhoA inhibition on actin stress fibers it generates a loose F-actin meshwork framing large cellular zones devoid of F-actin of same extent in all siRNA conditions.

Figure 2.

We next investigated the role played by caveolin-1 and cavin-1 in the control of the cell height (h), an essential parameter in TEM nucleation. The mean value of this cell shape parameter is proportional to the ratio between the volume (V) and spreading area (A) of cells (Table 1). The spreading area was estimated from the measurement of cell contours (Fig. 3A). The volume of cells was quantified by fluorescent dye exclusion, as depicted in Fig. 3B, and as previously described (44). Upon intoxication of siCTRL-treated cells, we recorded a significant increase of 36% of the spreading area together with 17% increase of the cell volume (Fig. 3C-3D and Table 1). The dominant impact of cell area changes over the volume parameter accounts for the calculated decrease of cell height of 15% (Table 1). Hence, when siCAV1- and siPTRF-transfected cells were treated with ExoC3, we recorded a reduction of cell volume concomitant to the increase in their spreading area (Fig. 3C-3D and Table 1). The reinforced reduction in cell height recorded in siCAV1 or siPTRF-treated cells is in good agreement with our findings showing that these treatments increase the density of TEMs. Note that in the absence of ExoC3, we recorded that the effects of siPTRF on cell shape parameters were slightly stronger than those of siCAV1, thereby highlighting the key involvement of caveolae in the control of cell height (Fig. 3C-3D). The depletion of caveolae and the inhibition RhoA work together to reduce cell height that favors together with the loss of F-actin the nucleation of TEMs.

Figure 3.

Table 1:

Caveolin-1 and cavin-1 have a different impact on TEM expansion dynamics

Since the TEM opening is transient, we next characterized the impact of caveolin-1 and cavin-1 in TEM dynamics that allow to define TEM maximal width. We implemented a pipeline of live-cell imaging and semi-automatic analysis that relies on the detection of Lifeact-GFP signal around TEMs to segment the opening area (18). Figure 4A shows the projections of the first image recorded for each TEM that formed over 1-hour recording (Fig. 4A). We see that TEM tunnels preferentially open at the cell periphery where the cell height is minimal (Fig. 4A). We then measured the maximal values of each TEM areas over 1 hour of video recording (Fig. 4B), as well as the speeds of opening and closure (Fig. 4C). Interestingly, we recorded 5.4-fold wider TEMs in siCAV1-treated cells, as compared to siPTRF- and siCTRL-treatments (Fig. 4B and Supplementary Movies 1, 2, 3). Interestingly, the time for TEMs to reach their maximal diameter (t_max) and the overall TEM cycles (t_c) remain identical in all conditions (Fig. 4C). Thus, TEMs became wider in siCAV1 condition in absence of change in the time frame of opening, suggesting that caveolin-1 controls the speed of opening. To capture initial values of TEM opening speed (S_o) we used a 15-fold higher temporal resolution, i.e. using a video recording of 1 image per second. Strikingly, we recorded a 2-fold higher opening speed in caveolin-1-depleted cells: S_{o_siCAV1}=2.4 µm²/s versus S_{o_siCTRL}=1.1 µm²/s in control cells, which contrasts with the minor impact of siPTRF with S_{o_siPTRF}=1.7 µm²/s (Fig. 4D). In conclusion, we have identified a specific function of caveolin-1 in the regulation of the opening speed of TEMs that has a critical impact on TEM maximal width.

Figure 4.

Loss of caveolin-1 sensitizes mice to EDIN-B lethal effects during S. aureus sepsis

We reasoned that the increased density and width of TEMs triggered by the cellular depletion of caveolin-1 should result in higher susceptibility of caveolin-1 (Cav1)-deficient (CAV1^-/-) mice to the inhibition of RhoA by EDIN-like mART exotoxins during bloodstream infection by S. aureus. This would establish caveolin-1 as a resistance factor in the pathogenicity triggered by EDIN-like factors from Staphylococcus aureus. To address this question, we first established the susceptibility of CAV1^-/- mice and wildtype littermates (CAV1^+/+) to S. aureus strain LUG1799 (WT edinB) in a model of septicemia (Fig. 5A). LUG1799 belongs to the European lineage ST80 derived from community-acquired methicillin-resistant S. aureus, which expresses EDIN-B mART exotoxin (EDIN-B) (16). We first monitored over a period of 7 days the survival of CAV1^-/- and CAV1^+/+ mice challenged with three increasing inocula of WT edinB. All the mice, except one CAV1^-/- mouse, recovered from infection triggered with 5 ×10⁶ CFU of bacteria/mouse (CFU/m), while all mice died 24 hours after intravenous injection of 5×10⁸ CFU/m. In contrast, when mice were challenged with an intermediate dose of WT edinB of 5×10⁷ CFU/m, we recorded a higher lethality of CAV1^-/- as compared to CAV1^+/+ mice (P < 0.001, Mantel‒Cox test). All the CAV1^-/- mice died on day 1 post-challenge, whereas the death of CAV1^+/+ occurred with a delay of 1 to 2 days, with one CAV1^+/+ mouse surviving (Fig. 5A, 5×10⁷ CFU/m). The loss of caveolin-1 expression thus sensitizes mice to bloodstream infection triggered by S. aureus-produced EDIN-B. We then explored the pathogenic effect of EDIN-B mART activity of RhoA. In control experiments with CAV1^+/+ mice infected with either WT edinB or ΔedinB strains, we saw no difference of susceptibility between the strains and despite a broad range of 4 different inocula tested (Fig. S4). In this set of experiments, we defined values of lethal dose 50 (LD₅₀) at 2.5×10⁷ CFU/m with both strains of S. aureus. When we challenged CAV1^-/- mice with this LD₅₀ of S. aureus (2.5×10⁷ CFU/m) we saw a lower survival with S. aureus WT edinB (n=11 death /18 mice), as compared to ΔedinB (n=4 death /17 mice) (P = 0.0123, Mantel‒Cox test) (Fig. 5C). To provide a causal link between the pathogenicity of EDIN-B recorded in CAV1^-/- mice and the inhibition of RhoA catalyzed by EDIN-B, we performed a similar experiment with S. aureus ΔedinB complemented with a plasmid expressing either WT EDIN-B (ΔedinB pEDIN-B) or the catalytically inactive mutant EDIN-B-RE (ΔedinB pEDIN-B-RE). We saw a significant decrease of survival in caveolin-1-deficient mice infected with ΔedinB pEDIN-B, as compared to mice infected with ΔedinB pEDIN-B-RE. We concluded that in the context of bloodstream infection by S. aureus, caveolin-1 expression confers a resistance to the pathogenicity triggered by EDIN-B mART activity on RhoA.

Figure 5.

Differential impacts of caveolin-1 and cavin-1 on membrane rigidity

Since we expect that S_o depends on membrane mechanical parameters (see the physical model description in the Materials and Methods), this suggests that caveolin-1, but not cavin-1 modulates TEM opening speed by affecting membrane mechanics. We then inferred changes in membrane mechanical properties upon depletion of caveolin-1 or cavin-1, using a refined theoretical model of cellular dewetting. This model accounts for the presence of several TEMs opening simultaneously (see the physical model description in the Materials and Methods). Importantly, the model is based on the hypothesis that plasma membrane deformation, enabling TEM nucleation and tunnel growth, is a function of membrane tension and bending rigidity, assuming a limited contribution of membrane adhesion to cortical cytoskeleton (45). Indeed, consistent with this hypothesis of a minimal impact of cortical cytoskeleton elements on membrane mechanics, the 2D STORM images (Fig. 2A) established a massive disruption of the dense F-actin meshwork in ExoC3-treated cells, leaving large cellular zones devoid of F-actin. As explained in the Materials and Methods section in detail, the model predicts that the initial opening speed S_o is proportional to the membrane tension, consistent with a critical role of membrane tension in TEM growth (9). From our measurements, we deduce that cells treated with siCAV1 have a significant 2-fold higher membrane tension than the controls, and no effect in siPTRF-treated cells (see Methods). Moreover, according to the model, the maximum TEM size R_max depends strongly on membrane bending rigidity but weakly on the initial membrane tension. Thus, from our R_maxmeasurements, the model allows the estimation of the bending rigidities κ in the different conditions. Using the following values for the siCTRL-treated cells - an initial membrane tension σ₀=2.5 10^-5 N/m (46) and a bending rigidity κ_siCTRL=23.4 k_BT (direct measurement, see below) – the model predicts a 55% reduction of membrane rigidity from a loss of expression of caveolin-1 and a lower reduction of 15% upon a loss of cavin-1 expression.

To test these predictions, we have treated cells with methyl-beta-cyclodextrin to deplete cholesterol from the plasma membrane and reduce its bending rigidity (47); unfortunately, this treatment affected the cell morphology, which precluded further analysis. Therefore, we used an independent approach to measure the membrane bending rigidity in different conditions of cell treatment. This quantitative method is based on pulling membrane tethers from cell-derived plasma membrane spheres (PMSs) that are devoid of F-actin cortex and preserve the lipid membrane (Fig. 6A) (21,48,49). PMSs prepared from untreated siCTRL-, siCAV1- and siPTRF-treated HUVECs were aspirated into a micropipette, allowing to control membrane tension. Membrane tethers were pulled from PMSs using optical tweezers (48). The force, f, exerted on the membrane tether can be measured as function of membrane tension (σ); it also depends on the bending rigidity (κ) following (Fig. 6B-C) (50). We waited about 30 seconds after tube pulling and changing membrane tension and then checked that we reached a steady state, where lipids and membrane proteins had enough time to equilibrate (Fig. S5). The analysis of the slope of f²versus σ provides a measurement of the membrane bending rigidity of a PMS (Fig. 6D). We measured a significant decrease of 30% of the bending rigidity from κ_siCTRL=23.4 ± 0.9k_BT to κ_siCAV1=17.0 ± 0.9 k_BT. Moreover, we observed no significant difference in siPTRF conditions, as compared to siCTRL, with a κ_siPTRF=23.4 ± 1.3 k_BT (Fig. 6D). In good agreement with the theoretical predictions, these measurements establish that the expression of caveolin-1, but not of cavin-1, significantly stiffens the plasma membrane.

Figure 6.

Discussion

We report that siRNA-mediated knockdown of key structural and regulatory components of caveolae sensitizes endothelial cells to the formation of TEM tunnels triggered by the inhibition of RhoA-driven actomyosin contractility. Hence, inhibition of RhoA reduces by 2-fold the pool of caveolae invaginations at the plasma membrane. Mechanistically, we report that targeted depletion of caveolin-1 and cavin-1 caveolae decreases cell volume and increases cell spreading, which concur to decrease the height of cells favoring membrane apposition for TEM nucleation. Strikingly, we establish a specific role for caveolin-1 in controlling the opening speed of TEMs that has a dramatic impact on TEM size. In good agreement with the recorded increase of TEM formation and width following caveolin-1 knockdown, we establish a higher susceptibility of Cav1-deficient mice to lethal effects triggered by EDIN-B mART during staphylococcal bloodstream infection. Finally, we provide theoretical and experimental evidence that in addition to the well-established role of caveolae in membrane tension homeostasis, caveolin-1 rigidifies plasma membrane either directly or indirectly, as discussed below.

Our biophysical measurements unravel that caveolin-1 depletion decreases membrane bending rigidity by 30%, while depletion of cavin-1 has no impact. This experimental value is of the same order of magnitude as the 55% decrease in bending rigidity inferred from the cell dewetting model. The difference recorded between these approaches can be attributed to several approximations in the theoretical model, notably the simplified treatment of the physical membrane tension variation, of the cytoskeletal contributions, and of the interactions between neighboring TEM tunnels. Our tube pulling experiments can be discussed along 2 lines. Indeed, since caveolin-1 is inserted in the cytosolic leaflet of the plasma membrane, when a nanotube is pulled towards the exterior of the PMS, we can expect 2 situations depending on the ability of caveolin-1 to deform membranes, which remains to be addressed (24). i) If Cav1 does not bend membranes, it could be recruited in the nanotube at a density similar to the PMS and our force measurement would reflect the bending rigidity of the PMS membrane. Cav1 could then stiffen membrane either as a stiff inclusion at high density or/and by affecting lipid composition. ii) If Cav1 bends the membrane, it is expected from caveolae geometry that the curvature in the tube would favor Cav1 exclusion. The force would then reflect the bending rigidity of the membrane depleted of Cav1, which should be the same in both types of experiments (WT and Cav1-depleted conditions) if the lipid composition remains unchanged upon Cav1 depletion. Note that the presence of a very reduced concentration of Cav1 as compared to the plasma membrane has been reported in tunneling nanotubes (TNT) connecting two neighboring cells (51). These TNTs have typical diameters of similar scale than diameters of tubes pulled from PMS. At this stage, we cannot decipher between both properties for Cav1. Considering a direct mechanical role of Cav1, previous studies showed that inclusion of integral proteins in membranes had no impact on bending rigidity, as shown in the bacteriorhodopsin experiment (52), or even decreased membrane rigidity as reported for the Ca^2+-ATPase SERCA (53). Previous simulations have also confirmed the softening effect of protein inclusions (54). Nevertheless, our observations could be explained by a high density of stiff inclusions in the plasma membrane (>>10%), which is generally not achievable with the reconstituted membranes. Considering an impact on lipid composition, it is well established that caveolae are enriched with cholesterol, sphingomyelin, and glycosphingolipids, including gangliosides (55,56), which are known to rigidify membranes (57,47). Thus, caveolin-1 might contribute to the enrichment of the plasma membrane with these lipid species. We did not establish experimental conditions allowing us to deplete cholesterol without compromising the shape of HUVECs, which prevented a proper analysis of TEM dynamics. Moreover, a previous attempt to increase TEMs width by softening the membrane through the incorporation of poly-unsaturated acyl chains into phospholipids failed, likely due to homeostatic adaptation of the membrane’s mechanical properties (18). Further studies are now required to establish whether and how caveolin-1 oligomers control membrane mechanical parameters through modulation of lipids organization or content. Caveolin-1 expression may also contribute to plasma membrane stiffening by interacting with membrane-associated components of the cortical cytoskeletal or by structuring ordered lipid domains. Nevertheless, it has been reported that the Young’s modulus of the cell cortex dramatically decreases in ExoC3-treated cells (17) suggesting a small additional contribution of caveolin-1 depletion to membrane softening. This is supported by 2D STORM data showing a dramatic reorganization of actin cytoskeleton in ExoC3-treated cells into a loose F-actin meshwork that is not significantly exacerbated by caveolin-1 depletion. Altogether, our results suggest that the presence of Cav1 stiffens plasma membranes, and that the exact origin of this effect must be further investigated.

Our study shows that membrane rigidity sets the maximal size of TEM aperture, although an actin ring appears before TEM closure (20). Actin ring assembly and stiffening is indeed a player in TEM opening, and it is included in our differential equation describing TEM opening dynamics (Eq. 3). In some configurations, actin ring assembly is the dominant player, such as in TEM opening after laser ablation (ex novo TEM opening), as we previously reported (20). In contrast, here we investigate de novo TEM opening, for which we expect that bending rigidity can be estimated without accounting for actin assembly (19). Such a bending rigidity estimate (Eq. 5) is obtained by considering two different time scales: the time scale of membrane tension relaxation, governed by bending rigidity, and the time scale of cable assembly, governed by actin dynamics. We expect the first time scale to be shorter, and thus the maximum size of de novo TEMs to be mainly constrained by membrane tension relaxation. However, we cannot rule out that the formation of an actin cable around the TEM before it reaches its maximum size may limit the correct estimation of the bending rigidity.

Our data establish a function to cavin-1-dependent caveolae in the regulation cell height. Indeed, we measured an increase in cell spreading and a decrease in cell volume upon depletion of caveolin-1 or cavin-1, which are essential components of caveolae. This is consistent with findings showing that cell homeostasis during spreading is achieved by decreasing cell volume. Such a coupling between variations in cell spreading area and cell volume is breached by disrupting cortical contractility, resulting in cell swelling (58). Consistently, we show that the ExoC3-triggered increase in endothelial cell spreading occurs concomitantly with a decrease in cell volume. This might be a consequence of the inhibition of RhoA signaling, which is permissive for the activity of volume-regulated anion channels (VRACs) (59). Here, we show that the decrease in cell volume upon depletion of cavin-1, and to a lesser extent after depletion of caveolin-1, occurs independently of RhoA signaling, i.e. in ExoC3-treated cells. Thus, how caveolae control the cellular volume once RhoA signaling is inhibited awaits determination. Our findings also suggest that depletion of caveolae and RhoA inactivation may release membrane-folding driven mechanical constraints that would limit cell spreading. Another hypothesis is that caveolae control indirectly the cellular geometry via a documented function of cavin-1 on cell signaling (50–63).

Our study points to underlying mechanisms by which caveolae regulate the frequency of TEM nucleation. Nucleation of TEMs requires the apposition of the basal and apical cell membranes, which is hindered by the intermembrane distance, set by the cell height. Meeting of the two membranes may create an initial precursor tunnel, which needs to be sufficiently big to enlarge into an observable TEM, instead of simply closing back. The size of the minimal precursor tunnel required to give rise to a TEM increases with membrane bending rigidity and decreases with membrane tension (19). Silencing cavin-1 or caveolin-1 both lead to a decrease in cell height, thus favoring the likelihood of precursor tunnel nucleation. While silencing cavin-1 has no significant impact on either membrane tension or bending rigidity, silencing caveolin results in both an increase of membrane tension and a decrease of bending rigidity, which results in a decrease in the required minimal radius of the precursor tunnel, thus further favoring TEM nucleation. Overall, our results offer a consistent picture of the physical mechanisms by which caveolae modulate TEM nucleation.

The molecular basis of interindividual variability in S. aureus infections is unclear, although the expression of caveolin-1 has recently been suggested (39). Indeed, a human genetics study pinpointed the impact of haploinsufficiency of the OTULIN deubiquitinase in sensitizing host cells to lysis triggered by the highly prevalent α-haemolysin pore-forming toxin of S. aureus, a major determinant in staphylococcal pneumonia (39). The defect in OTULIN activity led to an increase in caveolin-1 cellular protein levels in dermal cells, which in turn upregulates the expression of the ADAM10 receptor of alpha-haemolysin pore-forming toxin. Here, we report that caveolin-1 expression is not regulated by RhoA signaling. Furthermore, we establish that the loss of caveolin-1 expression sensitizes mice to the lethal effects triggered by EDIN-B mART activity on RhoA during S. aureus septicemia, thus ascribing a pathogenicity potential to this exotoxin that is counteracted by expression of caveolin-1. In line with this, a recent analysis of an observational cohort of patients with S. aureus community-acquired pneumonia indicated that EDIN-B, together with Panton– Valentin leukocidin, are positively associated with the etiology of hemoptysis, manifests by the presence of blood in sputum (64). Whether TEMs are involved in the etiology of hemoptysis remains to be investigated. Although we cannot argue that there is a causal link between the lethal effect of EDIN-B in caveolin-1-deficient animals and the protective function of caveolin-1 against TEM tunnel formation in endothelial cells, these findings represent a first step towards establishing that endothelial cells regulate TEM tunnel formation and width in vivo. Such a hypothesis is supported by previous findings showing that RhoA inhibition reduces paracellular permeability while dramatically increasing transcellular permeability, and that ADP-ribosyltransferases targeting RhoA increase vascular permeability to the point of animal death when TEM enlargement is no longer controlled (8,14). Collectively, these findings ascribe to variations in caveolin-1 expression a bidirectional impact on host susceptibility to S. aureus infection, pointing for a possible role of TEM tunnels.

Materials and Methods

Bacterial strains and culture conditions

S. aureus HT20020209-LUG1799, referred to as wild-type WT edinB in this study, is a minimally passaged ST80 SCCmecIV PVL+ MRSA strain isolated in France (deposited at http://www.ebi.ac.uk/ena) that is representative of ST80 CA-MRSA clones (65,66). S. aureus HT20020209-LUG1799 with the edinB gene deletion is referred to as ΔedinB in this study (16). The strain ΔedinB was complemented with a pMK4-pPROT plasmid expressing the wildtype form of EDIN-B to generate the strain ΔedinB pEDIN-B or with pMK4-pPROT expressing the catalytically inactive mutant form of EDIN-B (EDIN-B-R185E) to generate the strain ΔedinB pEDIN-B RE, as previously described (16). Both strains were grown in lysogeny broth (LB) with shaking at 200 rpm and 37 °C. Equal growth kinetics were verified (not shown).

Mouse infection model

Adult male and female B6.Cg-Cav1^tm1Mls/J mice (strain #: 007083, Jackson Laboratories) and C57BL/6J mice (Charles River) were housed under specific-pathogen-free conditions at the Institut Pasteur animal facilities licenced by the French Ministry of Agriculture (B75150102). Mice received food and water ad libitum, and their weight was recorded daily throughout the study. S. aureus strains were cultured in LB at 37 °C until reaching an OD₆₀₀ = 1 after overnight culture. After washing twice in PBS, cell pellets were resuspended in sterile 0.9% NaCl. Infections were carried out by injecting 300 µL serial dilutions of inoculum intravenously into the tail vein of the mice. Animal survival was monitored daily.

Cell culture, transfection and toxicity

Primary human umbilical vein endothelial cells (HUVECs, PromoCell) were cultured in human endothelial serum-free medium (SFM, Gibco) containing 20% foetal bovine serum, 20 ng/ml FGF-2, 10 ng/ml EGF, and 1 µg/ml heparin and referred to as complete SFM (SFMc). Cells were cultured on gelatine-coated culture ware at 37 °C with 5% CO₂ for as many as six passages. For siRNA transfection, HUVECs were cultured at a density of 38,000 cells/cm². ON-TARGETplus smart pool siRNA (Dharmacon) targeting human caveolin-1 (L-003467-00-0005), EHD2 (L-016660-00-0005), cavin-1/PTRF (L-012807-02-0005) or control RNAi SR-CL000 (Eurogentec) was used at 100 nM via magnetofection technology (OZ Biosciences) following the manufacturer’s instructions in serum-free OptiMEM (Gibco). When necessary, cells were electroporated 24 h post-magnetofection and then used from 48 to 54 h post-magnetofection. HUVEC electroporation of plasmids encoding caveolin-1-GFP (21) or Lifeact-GFP (Ibidi, GmbH, Planegg/Martinsried, Germany) was performed as described in (67). Briefly, cells were trypsinized and resuspended in Ingenio Solution (Mirus) containing plasmid DNA (10 µg/10⁶ cells) in a 4-mm cuvette (CellProjects). Cells were then electroporated at 300 V and 450 μF with one pulse of a GenePulser electroporator (Bio–Rad). Cells were incubated in SFMc, and the medium was replaced 3 h post-electroporation. Cells were treated 6 h post-electroporation. Recombinant ExoC3 and EDIN were produced in E. coli and purified as described in (8). Cells were treated with ExoC3 or EDIN exotoxins at a final concentration of 100 µM for 24 h.

Immunoblotting and Western blotting

Proteins were resolved on 12% SDS-polyacrylamide gels and transferred to nitrocellulose membranes (GE Healthcare). The primary antibodies used were mouse anti-EHD2 (L-05) (Santa Cruz sc-100724), rabbit anti-Cav1 (Cell Signaling Technology #3238), rabbit anti-PTRF (Proteintech, 18892-1-AP) and mouse anti-GAPDH (Santa Cruz sc-47724). The secondary antibodies used were HRP-conjugated anti-mouse or anti-rabbit (Dako). Signals were imaged using a Fujifilm LAS-3000 system and quantified with ImageJ software.

Immunofluorescence

HUVECs were seeded on a gelatine-coated µ-Dish 35 mm, high (Ibidi) and treated as indicated previously (20). Cells were fixed in ready-to-use paraformaldehyde, 4% in PBS (Bio–Rad). Immunostaining of fixed cells permeabilized in 0.5% Triton X-100 was performed. FITC-phalloidin or TRITC-phalloidin at 1 μg/ml (Sigma) were used to stain actin, and DAPI (Life Technologies) was used to label nuclei.

Video microscopy

HUVECs were electroporated with LifeAct-GFP-pCMV as described above and seeded on a gelatine-coated polymer coverslip dish (Ibidi). After treatment with ExoC3 (see above), the cells were supplemented with 25 mM HEPES (pH 7.4) and their proliferation was recorded at 37 °C with a Nikon T_i inverted microscope using an Ultraview spinning disk confocal system (Perkin Elmer). For determining TEM opening, images were taken every 10 to 25 seconds for h. To determine the opening speed (S_o), images were taken every second for 30 min. Acquired videos were analysed via an ICY-based semiautomatic protocol.

Cell volume measurement

After siRNA treatment and other treatments, cells were seeded onto a PDMS chip (2.10⁶ cells/mL) as described previously (44). Briefly, chambers were coated with 10 µg/ml fibronectin in PBS (Life Technologies) for 1 h at RT. Chambers were washed with medium before cell seeding. Cells were resuspended in medium supplemented with 0.5 mg/ml Alexa Fluor 488 dextran (MW 10 kD; Life Technologies) and then injected into the chamber. Finally, the chamber was immersed in medium to prevent evaporation. HUVECs were allowed to adhere for 4 to 6 h in SFMc at 37 °C with 5% CO₂ before acquisition.

Images were analysed with MATLAB (MathWorks). The intensity of the background was maximal in the absence of any object (I_max) and represented the fluorescence value for the maximal height of the chamber (h_max). In contrast, the pillar excludes fluorescence, which therefore reflects the minimal fluorescence intensity (I_min). At the cell level, the fluorescence was partially excluded at a given point for a cell at a given height (h_x,y). This strategy enables the measurement of the fluorescence intensity at this point (I_x,y). After calibrating the fluorescence intensity signal α = (I_max − I_min)/h_max, integration of the fluorescence intensity over the cell area provided the cell volume (V_cell):

Metal replicates and transmission electron microscopy

Metal replicates of the ventral plasma membranes of HUVECs cultured on glass coverslips were obtained by sonication according to a published protocol (42,68). Briefly, cells were rinsed three times with Ringer’s buffer with Ca²⁺ and then briefly subjected to a concentration of 0.5 mg/mL poly-L-lysine diluted in Ca²⁺-free Ringer’s buffer (Sigma‒Aldrich). Poly-L-lysine was removed by washing with Ca²⁺-free Ringer’s buffer. The coverslips were immersed in KHMgE buffer at 37 °C before sonication (Vibra-Cell VCX130 ultrasonic processor, Sonics) at a 20% amplitude. The unroofed cell membranes were then immediately fixed for 30 minutes with 2% glutaraldehyde/2% paraformaldehyde (PFA). The cell membranes were sequentially treated with 1% OsO4, 1.5% tannic acid and 1% uranyl acetate before dehydration via successive ethanol baths, which was ultimately substituted with hexamethyldisilazane (HMDS) (#C16700-250; LFG Distribution).

For immunogold labelling, sonicated plasma membranes were fixed with 4% PFA before incubation with primary (GFP Thermo Fisher A11122 Rabbit 1/20) and secondary antibodies coupled to gold beads (rabbit-gold 815.011 AURION goat 1/25), and the membranes were then incubated with a NaBH₄ solution to inactivate aldehydes. The membranes were finally fixed with 2% glutaraldehyde and subjected to the same treatment as that used for morphology studies. The dehydrated samples were metalized via rotary metallization. The coverslips were placed in the chamber of a metallizer (ACE600, Leica Microsystems). Once under a high vacuum (>10^-5 mBar), the membranes were covered with 2 nm of platinum stabilized by 4 to 6 nm of braided carbon. The resulting platinum replicas were separated from the glass by flotation on acid, washed several times in distilled water baths containing 0.1% detergent (one drop in 10 mL, Photo-Flo, Kodak), and placed on electron microscopy (EM) grids covered with a carbon film (200 mesh formvar/carbon, LFG Distribution). The grids were mounted in the goniometer with eucentric side entry of a transmission electron microscope operating at 80 kV (CM120, Philips), and images were recorded with a Morada digital camera (Olympus). The images were processed by ImageJ software to adjust brightness and contrast and are presented in reverse contrast.

RhoA mono-ADP-ribosylation assay

HUVECs were seeded at a density of 27,000 cells/cm² transfected with siCTRL, siCAV1 and siPTRF and then left untreated or treated with ExoC3. Cells were lysed in ADP-ribosylation buffer (20 mM Tris-HCl, 1 mM EDTA, 1 mM DTT, 5 mM MgCl₂ and cOmplete protease inhibitor EDTA-free (Roche), pH 7.5) and passed through a 27G syringe 20 times. Cell lysates were collected by centrifugation at 12,000 g for 10 min, and the protein concentration was determined by BCA assay (Thermo Fisher Scientific). The reaction was carried out by incubating 20 µg of cell lysate with 2 µg of ExoC3 and 10 µM 6-biotin-17-NAD⁺ (BioLog) at 37 °C for 30 min. The reaction was terminated by the addition of 1 mM DTT and Laemmli buffer (0.3 M Tris-HCl, 10% SDS, 37.5% glycerol and 0.4 mM bromophenol blue) and boiling at 100 °C for 5 min. The samples were subjected to 12% SDS‒PAGE, and the proportion of ADP-ribosylated (i.e., biotin-ADPr-RhoA) RhoA in the sample was measured by Western blotting using streptavidin–peroxidase.

Plasma membrane sphere formation and tether extraction

Plasma membrane spheres (PMS) were generated via a protocol adapted from (49). Cells were grown to 60–80% confluence on gelatine-coated 100-mm dishes and incubated for 6–8 h in PMS buffer [1.5 mM CaCl₂, 1.5 mM MgCl₂, 5 mM HEPES, 2 mg/ml glucose, 150 mM NaCl, 10 μM MG132 in PBS (pH 7.4)] to induce membrane swelling of the PMSs. Individual PMSs were aspirated using a casein-passivated micropipette connected to a piezo-stage (PI, Karlsruhe, Germany) for manipulation and to a hydrostatic aspiration control system (69). Micropipettes were made in house with borosilicate capillaries pulled into fine cones using a laser pipette puller (P-2000, Sutter Instrument Co.) and microforged at the desired inner diameter (3-4 µm), as described previously (21). For the extraction of tethers from PMSs, we used optical tweezers built in-house that consisted of a single fixed laser beam (infrared laser wavelength of 1070 nm) focused through a 60X water objective mounted on a confocal microscope (Nikon TE2000 inverted microscope) (70). To pull tethers from PMSs, we coated streptavidin beads (3 µm in diameter, Spherotech) with fibronectin, which allowed the beads to bind to PMSs. A membrane tether was generated by bringing the micropipette-held PMS into contact with a bead trapped by the optical tweezers, and then by moving the PMS away from the bead. After extraction, the tether was held at a constant length between 2 and 5 μm, and tether forces were measured during gradual increase in aspiration pressure and thus PMS tension. At a given membrane tension, the corresponding tether force was measured at least 30 s after the pressure change and when equilibration was established (see representative force vs time curve in fig. S5). Analysis was performed as described below. Briefly, for each membrane tether, the tether force (f) was plotted as a function of the square root of the membrane tension calculated using the Laplace law (71) and corrected when the length of the “tongue” of a PMS tether inside the micropipette was shorter than the radius of the pipette (72). For each tether, we determined a force f₀ corresponding to the intercept of the linear regression (f vs. ). To estimate the bending rigidity for PMSs obtained from membranes of cell treated differently (siCRTL, siCAV1 and siPTRF cells), the data obtained for all tethers were pooled and rescaled as (f-f₀)²/8π² and plotted as a function of membrane tension. The corresponding PMS rigidity was obtained from the slope of the linear fit calculated using Graphpad Prism.

Single-Molecule Localization Microscopy of F-actin

For single-molecule localization microscopy (SMLM) of F-actin, we used 2D STORM. HUVECs were cultured on 1.5 high-performance coverslips coated with 10 µg/mL fibronectin for 2 h at room temperature. Soluble G-actin was pre-extracted (0.25% Triton, 0.1% glutaraldehyde in 80 mM PIPES, 5 mM EGTA, and 2 mM MgCl₂, pH 6.8) for 30 s at 37 °C. The cells were then treated with glutaraldehyde (0.25% Triton, 0.5% glutaraldehyde in 80 mM PIPES, 5 mM EGTA, 2 mM MgCl₂, pH 6.8) for 10 min at 37 °C. Glutaraldehyde was quenched for 7 min at RT (0.1% NaBH₄ in PBS). Saturation was reached after 1 h at RT (0.22% gelatine and 0.1% Triton X-100 in PBS, pH 7.3). Actin filaments were stained overnight at 4 °C with phalloidin-AF647 (500 nM in PBS). Cells were then placed in switching buffer freshly prepared before imaging [50 mM Tris, 10 mM NaCl, 10% glucose, 0.5 mg/mL glucose oxidase, 50 µg/mL catalase, and 50-100 mM cysteamine (MEA, pH 8.3)] in the presence of phalloidin A647 (10-50 nM). Super-resolved images were acquired with an Elyra-7 SMLM microscope (Carl Zeiss, Germany) using an N.A =1.4 oil 63x objective (Carl Zeiss, Germany) with 1.518 refractive index oil (Carl Zeiss, Germany) and a pco.edge 4.2 camera system (Excelitas PCO GmbH). All processing analyses were performed with Zen software (Carl Zeiss, Germany). Localization of individual molecules was determined using a peak mask size of 15-pixel diameter and a peak intensity-to-noise ratio between 5 and 6. Drift was corrected using a model-based algorithm from Zen software. Super-resolution images were reconstructed at a 20-nm pixel size.

Mesh analysis of the F-actin network imaged via 2D STORM

To quantify actin mesh size from the super resolution images, we developed an image analysis workflow to reliably segment the delimiting continuous actin filaments. First, we clipped the images to a maximum detection count of 10 and applied a line enhancement filter to suppress short apparent discontinuities by modifying a previously described approach (73). Specifically, the maxima of the mean intensities along line profiles at 15 equally spaced orientations around each pixel were calculated (line length 21 px or approximately 0.4 µm). Subsequently, tube-like structures were extracted from the line-enhanced images by applying a Hessian filter implemented in scikit-image (smoothing width of 2 px) as described previously (74) with results binarized using Otsu thresholding. The obtained masks were subdivided into putative filament segments by defining sections of equal length along the mask’s morphological skeleton and assigning each pixel to its nearest segment (the chosen length was 20 px or approximately 0.4 µm). The final actin filament segmentation was performed considering only segments that: 1) were not morphologically connected to at least one other segment, to exclude non-filament detections, or 2) exhibited a mean detection count lower than the super-resolution image Otsu threshold. Finally, the actin meshwork was obtained as the connected components of the inverted actin filament segmentation mask.

Physical modelling

TEM dynamics were theoretically interpreted based on the generalization of our earlier model, which was used for a single TEM (19,20), to account for the case when several TEMs open simultaneously. This generalization was previously used to interpret the data in (18), and we present it here for completeness. The opening of a TEM is driven by a net force,

where σ is the membrane tension, T is the line tension, and R is the TEM radius. For a model lipid membrane in the entropic regime, membrane tension σ depends on R, quantified by the Helfrich’s law. Written in a generalized form to describe N simultaneous TEMs in the same cell, Helfrich’s law states that:

where , R_cell is the radius of the cell, k_B is the Boltzmann constant, is the temperature, and κ is the effective bending rigidity of the cell membrane, which quantifies the energy required to bend the membrane. Eq. 2 treats the effect of several simultaneous TEMs in an additive manner. This approximation is used here to predict TEM size, because at maximum opening of simultaneous TEMs their respective membrane relaxation is felt by each other, as it can be inferred from the shape that neighboring TEMs adopt in experiments. This additive treatment would appear less appropriate to describe the likelihood of nucleating a second TEM in the presence of a first one (a calculation that is not performed here), since membrane relaxation by a TEM may not be felt at membrane regions distant from it. While rigorously derived for a pure lipid membrane, we assumed that Helfrich’s law is applicable to describe the relationship between the effective membrane tension σ acting on TEMs and the observed projected surface in our cells. We expect Helfrich’s law to be applicable on short time scales, before active cell tension regulation takes place (75), especially in cases where cytoskeletal forces play a modest role, such as for red blood cells (76) or for the highly disrupted cytoskeletal structure of our intoxicated cells.

Thus, the parameter k in Eq. 2 is an effective bending rigidity, whose value may somewhat differ from that of a pure lipid membrane to account for the role played by protein inclusions and the mechanical contribution of the remaining cytoskeletal elements after cell treatment with the toxin. Moreover, we assumed that an eventual buffering role played by the remaining caveolae can be described through modification of the effective parameters σ₀ and κ. A limitation of our theoretical description arises from the use of spatially uniform changes in parameter values to describe differences between experimental conditions, thus assuming spatially uniform effects. However, we cannot exclude the existence of non-uniform effects, such as changes in the size and organization of the remaining actin mesh, which could set local, non-uniform barriers to TEM enlargement in a manner not accounted for by our model. As discussed by (19), the effective line tension is not a constant; it increases with time due to the formation of an actomyosin cable around the TEM. Stefani et al. described this increase as linear, T∼αt. The dynamics of TEM opening are derived from a balance between the driving force (Eq. 2) and cell–substrate friction. Assuming N identical TEMs, this balance is

where μ is the friction coefficient. While this equation can be solved numerically, the following analytical approximation can also be obtained, as derived in (18):

where x = N^1/2 R_max/R_cand R_max is the maximum TEM radius. As discussed in (18), for biologically relevant values of the model parameters, Eq. 4 leads to the following approximate estimate of the effective membrane bending rigidity:

Considering the experimental results shown in Table 2 and using the estimate κ ∼ (N·A_max) ^-1 based on Eq. 5, we deduced an effective bending rigidity decrease after silencing caveolin-1. We note that the estimate of κ provided by Eq. 5 is independent of α and thus of actin cable assembly. This simplification arises from membrane tension relaxing over a shorter time scale than actin assembly. Thus, we expect the maximum size of de novo TEMs to be mainly constrained by membrane tension relaxation (19), unlike ex novo TEM enlargement upon laser ablation, for which the dynamics of actin cable assembly control TEM opening (20). The approximate estimates given in Table 2 can be refined using Eq. 4 directly, which also considers variations in membrane tension. The following expression for the bending rigidity is thus obtained:

Table 2.

Eq. 6 is used to obtain the predictions of bending rigidity variations mentioned in the text: a reduction in effective bending rigidity by a factor of approximately 1.2 for siPTRF cell membranes and by a factor of approximately 2.3 for siCAV1 cell membranes, which is equivalent to a 15% decrease for siPTRF and 55% for siCAV1 cell membranes.

Fit of the initial opening speed

For short time intervals, the differential equation for the opening dynamics can be simplified to

where R_n = T/(2σ₀) is the minimal nucleation radius. This equation can be integrated to obtain

where C is an integration constant, whose value is such that R = R₀ for t = 0, with R₀ the unknown nucleated TEM radius, which is larger than the minimal nucleation radius R_n; R₀ > R_n. Because all TEM measurements are reflect R ≫ R₀ > R_n, the dominant term on the left-hand side is the term proportional to R² = A/π, where A is the TEM area. These considerations yield the following estimate of σ₀:

where Δt = 1 s is the time interval between two acquisitions; A₁ is the TEM area in the first image after TEM opening (taken on average at a time Δt/2), and A₂ is the TEM area in the second image.

Statistical analysis

Statistical tests were performed using the R Software v4.2.1(R Foundation for Statistical Computing, Vienna, Austria. https://www.R-project.org/), along with packages lme4 (1.1-30) (77), lmerTest (v3.1-3) (78), emmeans (v1.8.0), except for the F-actin mesh size where the Prism Software was used. All experiments were repeated at least three times to ensure reproducibility and corresponding variability was accounted for in statistical analyses using mixed-effect regressions, with a random intercept estimated for every technical replicate. In particular, Binomial outcomes (e.g. presence/absence) were analysed using mixed-effect logistic regression. Continuous measurements (e.g. TEM area) were investigated with a Gamma log-link function in a mixed-effect framework. Contrasts between multiple pairs of categorical predictors were calculated through estimated marginal means with Tukey’s correction. P-values were calculated as indicated in the respective figure legends. P-values were considered statistically significant at P ≤ 0.05. Significance levels are indicated as follows: ns: not significant if P >0.05; * : P ≤0.05; **: P ≤0.01; ***: P ≤0.001; ****: ≤ 0.0001.

Acknowledgements

C. Morel and E. Lemerle were supported by PhD fellowships from the University Paris Cité Doctoral School BioSPC and Sorbonne University Doctoral School complexité du vivant, respectively. We thank Amel Mettouchi, Arnaud Echard, Virginia Ribeiro de Andrade (Institut Pasteur, Paris, France) and Michael Henderson (Institut Pasteur/Institut Curie, Paris France) for technical advice, sharing reagents and for discussions. We thank Pierre Nassoy (LP2N, Bordeaux, France), Francoise Brochard Wyart (Institut Curie, Paris, France), and Anne Blangy (CRBM, CNRS, Montpellier, France) for insightful discussions. We thank Darius Koster for sharing results and for fruitful discussions on tether pulling experiments of plasma membrane spheres. We thank Gaëlle Letort (Department of Developmental and Stem Cell Biology, Institut Pasteur, CNRS UMR 3738) for helpful advice on image analysis. We also thank the UTechS PBI, which is part of the France–BioImaging infrastructure network (FBI) supported by the French National Research Agency (ANR-10-INBS-04; Investments for the Future) and acknowledges support from Institut Pasteur, ANR/FBI, the Région Ile-de-France (program DIM1HEALTH), and the French Government Investissement d’Avenir Programme-Laboratoire d’Excellence ‘Integrative Biology of Emerging Infectious Diseases’ (ANR-10-LABX-62-IBEID) for the use of the Zeiss ELYRA7 microscope.

Supplementary materials

Figure S1. Controls of siRNAs and RhoA ADP-ribosylation efficacies.

A Immunoblots show caveolin-1 (IB: CAV1) and cavin-1/PTRF (IB: PTRF) in total cellular extracts of HUVECs transfected with siCTRL and then treated for 24 h with ExoC3. Immunoblot GAPDH (IB: GAPDH) was used as the loading control. Immunoblots are representative of 3 independent experiments.

B Immunoblots of caveolin-1 (IB: CAV1) and cavin-1/PTRF (IB: PTRF) show the specific and cross-depletion effects of siCAV1 and siPTRF. Immunoblot anti-GAPDH antibody (IB: GAPDH) shows equal loading. The graph shows caveolin-1 and cavin-1/PTRF levels normalized to the level of GAPDH (3 independent experiments).

C Western blots show the fraction of ADP-ribosylated RhoA in cells that were resistant to a second round of in vitro ADP-ribosylation with biotin-NAD+. Western blot shows the fraction of ADP-ribosylated RhoA in vitro as detected with streptavidin–peroxidase (IB: Biotin-ADPr) i.e. not modified during cell intoxication. Immunoblotting with an anti-RhoA antibody (IB: RhoA) revealed equal RhoA protein levels. Immunoblotting with an anti-GAPDH antibody revealed equal protein loading. Blots are representative of n=3 independent experiments. The graph shows the mean values of the blot signal intensities ± s.ds. from n=3 independent experiments. Values correspond to the signal intensities of biotin-tagged ADP-ribosylated RhoA (Biotin-ADPr) normalized to those of RhoA and GAPDH IB signals. Values are expressed as a percentage compared with the intensity of the siCTRL-transfected untreated cells, which was set to 100%.

Figure S2. Caveolin-1 and cavin-1/PTRF depletion increases TEM formation in both ExoC3- and EDIN-treated cells.

A The graph shows the distribution of HUVECs between classes defined by TEM tunnel density ranging from a group of cells displaying only 1 TEM and those for which the density increased by a factor of 1 through those cells with 40 TEMs (y-axis). HUVECs were transfected with siCTRL, siCAV1 or siPTRF before treatment with ExoC3. The graph includes the geometric means (N_TEM) of the density of TEMs per cell within the whole cell population ± s.d. Graph shows technical replicates pooled together. Statistical data analysis using a mixed-effect linear model, with random intercept shows significant differences between values of N_TEM, ****P<0.0001. Data from n=1,400 cells per condition from 7 independent experiments.

B Histograms show the percentages of EDIN-treated cells with at least one TEM (n=986 cells per condition from 5 independent experiments). Error bars show 95% confidence intervals (CIs). Data analysis with a logistic regression model adjusted for multiple comparisons using Tukey’s HSD test, ****P<0.0001; the siCTRL vs. siCAV1 groups and the siCTRL vs. siPTRF groups. No difference was recorded between the siCAV1 and siPTRF groups.

C The graph shows the distribution of HUVECs between classes as defined by TEM density with ranging from a group of cells displaying only 1 TEM and those for which the density increased by a factor of 1 through those cells with 40 TEMs (y-axis). HUVECs were transfected with siCTRL, siCAV1 or siPTRF before treatment with ExoC3. The graph includes values the geometric means (N_TEM) of the density of TEMs per cell within the whole cell population ± s.d. Statistical data analysis was based on a mixed linear model with a random intercept and fixed effects and revealed significant differences between N_TEM values, ****P<0.0001 (n >986 cells per condition from 5 independent experiments).

Figure S3. Depletion of the caveolar accessory component EHD2 increases TEM formation.

A Immunoblots show EHD2 cellular levels (IB: EHD2) in total cellular extracts of HUVECs transfected with siCTRL or siEHD2 and then treated for 24 h with ExoC3. Immunoblot GAPDH (IB: GAPDH) was used as the loading control. Immunoblots are representative of n=3 independent experiments.

B Histograms show the percentages of C3-treated cells displaying at least one TEM (n=1000 cells per condition from 5 independent experiments). Error bars show 95% confidence intervals (CIs). Data analysis with a logistic regression model adjusted for multiple comparisons using Tukey’s HSD test, ****P<0.0001 for the siCTRL versus siEHD2 groups.

C The graph shows the distribution of HUVECs between classes as defined by TEM density ranging from a group of cells displaying only 1 TEM and those for which the density increased by a factor of 1 through those cells with 40 TEMs/cell (y-axis). HUVECs were transfected with siCTRL or siEHD2 before treatment with ExoC3. The graph includes values of the geometric means (N_TEM) of the density of TEMs per cell within the whole cell population ± s.d. Statistical data analysis was based on a mixed linear model with a random intercept and fixed effects and revealed significant differences between N_TEM values, ****P<0.0001 (n=1000 cells per condition from 5 independent experiments).

Figure S4. CAV1+/+ mice susceptibility to EDIN-B in Staphylococcal septicemia.

Kaplan‒Meier survival curves with data obtained through 7 days from groups of CAV1+/+ infected intravenously at Day 0 with different doses of LUG1799 wild-type S. aureus, expressed as colony-forming units per mouse (CFU/m). Comparative analysis of CAV1^+/+ mouse susceptibility to bloodstream infection with either the WT edinB or ΔedinB strain. Mice were injected with 5×10⁶ CFU/m (n=5 mice infected with the WT edinB or ΔedinB strain; 1 experiment), 107 CFU/m (n=17 and n=19 mice infected with the WT edinB or ΔedinB strain, respectively; 3 experiments), 5 ×10⁷ CFU/m (n=19 or n=18 mice infected with the WT edinB or ΔedinB strain; 3 experiments), and 5×10⁸ CFU/m (n=4 or n=5 mice infected with either the WT or ΔedinB strain, respectively; 1 experiment). There were no significant differences in the kinetics of survival between the WT and ΔedinB-infected animals, as determined by log-rank test (Mantel‒Cox).

Figure S5. Force measurements were done at equilibrium

Graph shows an example of a force versus time curve during three consecutive tube pulling experiments from the same PMS (Fig. 6). We observe that the force reaches equilibrium (Plateau value) at about 10 seconds after the tube is pulled. After 30 s, the force remains constant, which means that we performed the tube pulling experiments from the PMS under technical conditions of equilibrium, ensuring that lipids and membrane proteins had enough time to reach the tether by convective or diffusive movement.

Supplementary Movies

Supplementary Movie 1:

Cycles of TEM tunnel opening and closure in GFP-LifeAct expressing HUVEC transfected with a control siRNA prior to intoxication with ExoC3 at 100 μg/ml for 24 hours. Video recorded at 1 frame every 15 seconds and played at seven images per second. Scale bar, 10 μm.

Supplementary Movie 2:

Cycles of TEM tunnel opening and closure in GFP-LifeAct expressing HUVEC transfected with siRNA targeting caveolin-1 prior to intoxication with ExoC3 at 100 μg/ml for 24 hours. Video recorded at 1 frame every 23 seconds and played at seven images per second. Scale bar, 10 μm.

Supplementary Movie 3:

Cycles of TEM tunnel opening and closure in GFP-LifeAct expressing HUVEC transfected with siRNA targeting cavin-1 prior to intoxication with ExoC3 at 100 μg/ml for 24 hours. Video recorded at 1 frame every 20.5 seconds and played at even images per second. Scale bar, 10 μm.