Design of roxCre for DreER-induced mCre expression

(A) A schematic showing genetic labeling and/or gene knockout in CreER-expressing cells. (B, D, F) Strategies for DreER-induced Cre expression.

(C) Crossing with R26-tdT mice, R26-RSR-Cre exhibits leakiness in E13.5 embryos. Scale bars, yellow 1mm. Each image is representative of 5 individual biological samples.

(E) Examination of Cre leakiness by whole-mount fluorescence images of organs collected from R26-RSR-Cre2;R26-26-GFP adult mice. Scale bars, yellow 1mm. Each image is representative of 5 individual biological samples.

(G) Examination of Cre leakiness by whole-mount fluorescence images of organs collected from R26-R-reverseCre-R;R26-tdT adult mice. Scale bars, yellow 1mm. Each image is representative of 5 individual biological samples.

(H) A schematic showing the design for roxCre and mCre.

(I) A schematic showing mCre1 to mCre12 by insertion of rox into Cre cDNA at 12 different loci. Two dual-recombinase designs for inducible Cre expression once tried before.

(J) Examination of mCre for recombination efficiency by the loxP-Stop-loxP-GFP reporter.

(K) Immunofluorescence images of cells stained with GFP on cells. Scale bars, white, 100 µm. Each image is representative of 5 individual biological samples.

(L) Quantification of the percentage of cells expressing GFP in each group. Data are the means ± SEM; n = 5.

DreER-induced mCre robustly recombines inert alleles

(A) A schematic showing the experimental design to test the recombination efficiency of mCre1 and mCre7 on the R26-Confetti allele. Tam-induced DreER-rox recombination leads to mCre1/tdT or mCre7/GFP expression in hepatocytes in strategy 1 or 2, respectively. Strategy 3 uses conventional Alb-CreER as control. YFP and mCFP signals are used for the examination of recombination on the R26-Confetti allele.

(B) Fluorescence images of YFP and mCFP on liver sections collected from mice in strategy 1-3. Strategy 1 and 3 exhibit tdT or GFP in hepatocytes after DreER-rox recombination, respectively. Scale bars, 100 µm. Each image is representative of 5 individual biological samples.

(C) Quantification of the percentage of hepatocytes (Heps) expressing either YFP and/or mCFP in strategy 4-6. Data are the means ± SEM; n = 11 mice for each strategy; ****P < 0.0001 by one-way ANOVA.

(D) A schematic showing the experimental strategy to test the recombination efficiency of mCre4 and mCre10 on R26-Confetti allele. Tam-induced recombination leads to mCre4/tdT or mCre10/GFP expression in endothelial cells (ECs) in strategy 4 or 5, respectively. Strategy 6 uses conventional Cdh5-CreER as control. YFP and mCFP signals are used for the examination of recombination on R26-Confetti allele.

(E) Fluorescence images of YFP and mCFP on intestinal sections collected from mice in strategy 4-6. Strategy 4 and 5 exhibit tdT or GFP in ECs after DreER-rox recombination, respectively. Scale bars, 100 µm. Each image is representative of 5 individual biological samples.

(F) Quantification of the percentage of ECs expressing either YFP and/or mCFP in strategy 4-6. Data are the means ± SEM; n = 11 mice for each strategy; ****P < 0.0001 by one-way ANOVA.

Dre-induced mCre efficiently deletes genes

(A) A schematic showing the experimental design for Dre-induced mCre expression and the subsequent gene deletion.

(B) A schematic showing the experimental strategy.

(C and D) qRT-PCR analysis of the relative expression of Ctnnb1 (C) and Glul (D) in the tdT+ hepatocytes. Data are the means ± SEM; n = 5; ****P < 0.0001 by student’s t-test.

(E) A schematic showing the experimental strategy.

(F) Immunostaining for tdT, β-Catenin, GS, and E-CAD on liver sections collected on the day 3 post-Tam. PV, portal vein; CV, central vein. Scale bars, yellow 1mm; white 100 µm. Each image is representative of 5 individual biological samples.

(G) Immunostaining for tdT, β-Catenin, GS, and E-CAD on liver sections collected at week 4 post-Tam. Scale bars, yellow 1mm; white 100 µm. Each image is representative of 5 individual biological samples.

(H) A schematic showing the experimental strategy.

(I) Western blotting of β-Catenin and GAPDH in tdT+ cells.

(J) Quantification of the relative expression of β-Catenin protein. Data are the means ± SEM; n = 3. **P < 0.01 by student’s t test.

(K) qRT-PCR analysis of the relative expression of Ctnnb1 in the tdT+ cells. Data are the means ± SEM; n = 6. ****P < 0.0001 by student’s t test.

(L) qRT-PCR analysis of the relative expression of Glul, Axin2, Cyp1a2, Cyp2e1, Oat, Tcf7, Lect2, Tbx3, Slc1a2, and Rhbg in the tdT+ cells. Data are the means ± SEM; n = 6. ***P < 0.001, ****P < 0.0001 by student’s t test.

R26-loxCre-tdT is efficiently recombined by CreER

(A) A schematic showing the knock-in strategy for the generation of the R26-loxCre-tdT allele. In this line, tdT is used to denote the mCre expression after the removal of Stop.

(B) A schematic showing the experimental strategy 1 to examine the leakiness of R26-loxCre-tdT mice.

(C) A schematic showing the experimental strategy 2 to test mCre/tdT expression by AAV8-TBG-Cre.

(D) Immunostaining for tdT on tissue sections shows tdT expression in the liver and pancreas when recombination was intiated by AAV8-TBG-Cre. Scale bars, white 100 µm. Each image is representative of 5 individual biological samples.

(E) A schematic showing the experimental strategies 3 and 4 for comparing the CreER-mediated first recombination efficiency between Cdh5-CreER;R26-tdT and Cdh5-CreER;R26-loxCre-tdT mice.

(F) Immunostaining for tdT and VE-Cad on liver sections collected on day 7 post-Tam. Scale bars, white 100 µm. Each image is representative of 5 individual biological samples.

(G) Quantification of the percentage of VE-Cad+ ECs expressing tdT. Data are the means ± SEM; n= 6. ****P < 0.0001 by student’s t-test.

R26-loxCre-tdT enables CreER to recombine R26-Confetti efficiently

(A) Schematics showing the experimental design. In Cdh5-CreER;R26-loxCre-tdT;R26-Confetti mice, Tam-induced CreER-loxp recombination switches R26-loxCre-tdT into R26-mCre-tdT allele with simultaneous tdT labeling and expression of mCre, which subsequently targets R26-Confetti (right panel). The conventional Cdh5-CreER;R26-Confetti mice are used as control.

(B) A schematic showing the experimental strategy.

(C) Whole-mount YFP and mCFP fluorescence images of retina collected from two mice groups. Scale bars, white 100 µm. Each image is representative of 5 individual biological samples.

(D) Immunofluorescence images of YFP, mCFP, and VE-Cad on tissue sections show significantly more YFP+ and/or mCFP+ ECs in the Cdh5-CreER;R26-loxCre-tdT;R26-Confetti mice compared with that of Cdh5-CreER;R26-Confetti mice (left panel). The right panel shows the quantification of ECs expressing YFP and/or mCFP. Data are the means ± SEM; n = 5. ****P < 0.0001 by student’s t-test. Scale bars, white 100 µm. Each image is representative of 5 individual biological samples.

R26-loxCre-tdT enables Alb-CreER to efficiently knockout genes in hepatocytes

(A) Schematics showing the experimental designs for Ctnnb1 gene knockout using either Alb-CreER or Alb-CreER;R26-loxCre-tdT mice.

(B) A schematic showing the experimental strategy. Alb-CreER;R26-tdT2;Ctnnb1flox/flox and Alb-CreER;R26-loxCre-tdT;Ctnnb1flox/+ mice were injected with Tam for 5 times, while Alb- CreER;R26-loxCre-tdT;Ctnnb1flox/flox mice were injected with Tam for one time.

(C) Immunostaining for tdT, β-Catenin, GS, and E-CAD on liver sections. Scale bars, yellow 1mm; white 100 µm. Each image is representative of 5 individual biological samples.

(D) Immunostaining for tdT and CYP2E1 on liver sections. Scale bars, yellow 1mm; white 100 µm. Each image is representative of 5 individual biological samples.

(E) Western blotting of β-Catenin and β-Actin expression in hepatocytes, n = 3.

(F) Quantification of β-Catenin expression. Data are the means ± SEM; n = 5.

(G) qRT-PCR analysis of the relative expression of Ctnnb1 in the hepatocytes.

(H) qRT-PCR analysis of the relative expression of Glul, Axin2, Cyp2e1, Oat, Tcf7, Lect2, Tbx3, and Slc1a2 in hepatocytes. Data are the means ± SEM; n = 7; ns, non-significant; *P < 0.05, **P < 0.01, ***P < 0.001, ****P < 0.0001 by one-way ANOVA.